Window Installation in Sunrise - Free In-Home Measure, Written Price

Fast, Reliable Window Installation Across Sunrise

Window installation in Sunrise, FL means meeting Broward County’s High Velocity Hurricane Zone code, plain and simple. Most homes here were built in the 1970s and 1980s with original aluminum single-pane windows and wide sliding glass doors that fail today’s impact standards. Winslow Windows & Doors replaces those units with PGT, CGI, CWS, and ES Windows products that carry Florida Product Approval numbers and pass the same-day county inspection. Call (904) 913-5886 and a live person answers, 24 hours a day.

Call (904) 913-5886

If you’re reading this from a Sunrise neighborhood like Sunrise Golf Village, Sawgrass Mills area, or the condos along Oakland Park Boulevard, you’re likely looking at windows that predate the post-Hurricane Andrew code overhaul. That’s the defining job type across this city, and it’s work we’ve done hundreds of times.

Why Winslow Windows & Doors Is Sunrise’s Preferred Window Installation Company

Ed Winslow started this company in 2011 because he was tired of watching national chains hand homeowners ticket numbers instead of answers. We’re locally owned, owner-operated, and Ed’s name is on the door, and on every job we do. Our Sunrise customers call a number where a real person picks up, every time. No voicemail loops, no call centers.

Our technicians arrive background-checked and in uniform. You’ll know exactly who’s at your door before the truck pulls up. We pull the required Broward County permits, schedule the inspection, and stand behind the work with the 36500-Day Done Right Promise: if it’s not done right, we make it right. No fine print, no expiration.

Sunrise homeowners have relied on us for everything from single window replacements to whole-home impact packages across every neighborhood in the city. When a condo association on Sunrise Lakes Drive needs documentation proving Florida Product Approval compliance, we provide it. When a ranch home near Welleby Park needs a corroded sliding door replaced before an insurance re-inspection, we coordinate the permit and the inspection the same week.

Our Window Installation Services in Sunrise

We handle the full range of Window Installation work, but these four types dominate the Sunrise market. Each one has specific code requirements under Broward’s HVHZ rule, and each one gets specified differently depending on the opening.

Single & Double Hung Windows

The single-hung aluminum windows original to Sunrise CBS homes are the most common replacement call we get. Homeowners typically upgrade to impact-rated single or double hung units from PGT or CWS, sized to the rough opening and carrying a design pressure rating matched to the wind zone. For a 1970s Sunrise ranch, we almost always recommend a full frame-to-jamb replacement, not a retrofit insert. The old frames have oxidized to the point where a pocket install would leave the new window sitting in a corroded track.

Horizontal Roller Windows

You’ll see these on low-rise condos and a lot of 1980s Sunrise construction. The original rollers gum up from humidity, the frames warp, and the units lose their seal. We replace them with impact-rated horizontal rollers that carry a Miami-Dade NOA, and we re-flash the opening so water stops finding its way into the jamb. Condo owners should know: Broward requires the same HVHZ compliance on a third-floor horizontal roller as it does on a ground-floor casement.

3-Panel Sliding (3-Lite Roller) Windows

This is the Sunrise-specific job, more than any other window type in the city. The 3-lite roller configuration is everywhere in 1970s ranch homes and garden apartments. The original units had aluminum tracks that corrode in South Florida humidity until the sash jumps the jamb. We pulled one from a Sunrise Golf Village home recently, a 1981 CBS ranch, and replaced it with a PGT WinGuard impact-rated slider carrying a Miami-Dade NOA. Re-flashed the opening, set the new jamb, and the same-day county inspection passed. The homeowner’s wind mitigation report now lists large-missile protection on every opening.

Casement Windows

Casements are common in Sunrise kitchens and bathrooms where the original builders wanted a crank-out window over a counter or sink. The old aluminum casements lose their cranks and the seals fail within a decade. Our replacement casements come from PGT or CGI, impact-rated, with stainless hardware that actually survives the humidity. We set them with a full perimeter flange and pull the permit so the installation is documented for your insurance file.

Trusted Brands We Service in Sunrise

We’re an authorized installer for PGT, CGI, CWS, and ES Windows, which matters because these brands carry the Florida Product Approval numbers Sunrise inspections require. When you get a quote from us, it lists the specific approval number for the exact configuration going into your opening, not a generic line item that says “impact window.” For Sunrise’s wind zone, we specify design pressure ratings matched to each opening’s size and floor height, never above +/-100 PSF, because anything beyond that is a made-up number. And because we install these brands day in and day out across Broward, turnaround from order to installation moves faster than with a shop that special-orders occasionally.

Common Window Installation Problems We See in Sunrise Homes

• Corroded sliding glass door tracks. Original 1970s aluminum sliders in Sunrise bind so badly during humid afternoons that the sash jumps the jamb. That gap fails the HVHZ pressure test and gives your insurer a reason to deny a windstorm claim after the next named storm.
• Fogged single-pane originals. Sunrise condos built in the 1980s develop seal failure within 10 years. Broward inspectors flag the fogged units as non-compliant when a unit owner tries to sell, because the outdated Florida Product Approvals don’t cover the replacement glazing.
• Cheap quotes that skip the permit. Some installers quote a low number by reusing old frames and skipping the county permit. That leaves the large-missile rating unverified, which means your insurer can deny a windstorm claim. A compliant quote includes the permit, the inspection, and the documentation.
• Wrong design pressure for the opening. A window spec’d for a lower wind zone won’t pass a Sunrise inspection. We match design pressure to the specific opening size, floor height, and wind zone, and we show you that number on the quote.

Pricing for Window Installation in Sunrise, FL

What Window Installation Costs in Sunrise

The numbers above are real anchors for the Sunrise market, and they reflect what Broward’s HVHZ code actually requires. A cheap quote that comes in under $800 per opening usually means one of three things: the installer is reusing old frames, skipping the permit, or installing a window that doesn’t carry a Florida Product Approval for the configuration. None of those pass inspection, and all of them put your insurance claim at risk.

What moves the price in Sunrise specifically: opening count is the biggest lever, then floor height because taller elevations carry higher wind loads, then frame material. Aluminum frames cost less up front but don’t insulate as well as vinyl or thermally broken aluminum. We’ll walk you through the tradeoffs at the estimate, and the written quote locks the number. Free in-home measure, free written quote. Call (904) 913-5886.

Florida Pays You Back

The incentives stack in Sunrise, and we document the work so you can claim them. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit covers 30% of product cost, up to $600 per year on qualifying units. And after a wind-mitigation inspection, which runs about $75 to $150, Sunrise homeowners typically see windstorm-premium credits averaging around 25% on the windstorm portion of the policy. We don’t control what your carrier grants, but we provide the documentation that makes the credits possible.

One comparison worth making: impact windows versus hurricane shutters. Shutters require you to be home, haul panels out, and hang them in the rain. Impact windows protect every opening permanently, no panels to hang, no storage, no forgotten windows during a warning. The long-term insurance math usually favors full replacement, especially in Sunrise where the original windows are already failing.

We Also Serve Cities Near Sunrise

Our crew serves Window Installation in Sunrise and the surrounding area, including Fort Lauderdale, Hollywood, Pembroke Pines, and Miramar. Dispatch and scheduling are coordinated from our South Florida office, and the same background-checked, uniformed technicians who work in Sunrise cover those neighborhoods too. Same live answer, same 36500-Day Done Right Promise.

FAQs - Window Installation in Sunrise

Every Replacement Window in Sunrise Has to Meet a Higher Bar

Here’s the part most window companies won’t tell you until you’re halfway through a quote: Sunrise sits under Broward County’s High Velocity Hurricane Zone designation under the Florida Building Code. That’s a stricter standard than the wind-borne debris regions covering Fort Lauderdale or Miami Beach. Every replacement window sold in Sunrise has to carry a Florida Product Approval meeting HVHZ performance standards, and the older 1970s aluminum single-pane units cannot satisfy that without a full frame-to-jamb replacement. There’s no retrofit shortcut that passes inspection. There’s no pocket insert that gets you a compliant large-missile rating. The frame has to come out, the opening has to be re-flashed, and the new window has to be documented with the approval number, the design pressure, and the inspection report.

That Sunrise-specific code path is the single biggest reason our quotes look different from a national chain’s. We include the permit, the county inspection, the flashing, the approval documentation, and the labor to do it right. A cheap quote skips the permit by reusing old frames, leaves the large-missile rating unverified, and gives your insurer a reason to deny a windstorm claim after the next named storm. Sunrise’s housing stock is old enough now that this isn’t a hypothetical. We see the denial letters.

Ed Winslow put his name on this company in 2011 because he wanted Sunrise homeowners to have a local option that actually stands behind the work. The 36500-Day Done Right Promise means if it’s not done right, we make it right. A century-long standard of accountability. We’re the one down the road.

Call (904) 913-5886 to schedule your free estimate. A live person answers, and we’ll give you a written, line-item quote with the approval numbers, the design pressures, and the exact scope of work.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving South Florida since 2011.