Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterFast, Reliable Shingle, Tile & Metal Roofing Across Coral Springs
Shingle, tile, and metal roofing in Coral Springs runs $9,500 to $45,000 for a full replacement on a typical CBS ranch, and most tear-offs take three to seven working days once materials land. Those numbers move a lot here because Coral Springs isn’t a generic South Florida suburb: canal setbacks, county stormwater rules, and 40-year-old concrete block homes all change how a roof gets scoped. If you’re looking at a roof that’s shedding granules into the canal or tile that’s spalled past the point of patching, call (904) 913-5886 and we’ll walk the roof with you before you spend a dime.
Why Winslow Windows & Doors Is Coral Springs’s Preferred Shingle, Tile & Metal Roofing Company
Ed Winslow put his name on this business in 2011, and in Coral Springs that name carries weight. Homeowners here call us because the Shingle, Tile & Metal Roofing crew that shows up is background-checked, uniformed, and briefed on your specific roof before the truck parks. We don’t hand you a ticket number. You get a live person on the phone at 3 a.m. when a tile lets go during a squall, and you get the 36500-Day Done Right Promise behind every nail we drive. If it’s not done right, we come back until it is. That’s a century-long standard, and it applies to every roof we touch in Coral Springs.
We’re not a national chain with a rotating cast of subcontractors. We’re the one down the road, and our Coral Springs customers know it. When a Ramblewood homeowner calls about a rusted ridge vent or a loose hip tile, we know the house was likely built between 1972 and 1985, we know the original underlayment is probably delaminated, and we know the canal-facing slope will need Broward County scrutiny. That local knowledge isn’t something we read in a manual. It’s what we’ve learned pulling tile off hundreds of CBS roofs across this city.
Our Shingle, Tile & Metal Roofing Services in Coral Springs
Full Tear-Off and Re-Deck on CBS Homes
Most Coral Springs homes from the 1970s and 1980s sit on concrete block with original tile or shingle systems that are decades past their intended life. When we tear off, we almost always find moisture damage at the top plates behind stucco parapets. We re-deck as needed and rebuild the roof-to-wall connections to current Florida Building Code, not to what was acceptable in 1979.
HVHZ-Compliant Concrete and Clay Tile
Coral Springs falls inside Broward County’s High-Velocity Hurricane Zone, so replacement tile systems must carry Miami-Dade NOA product approvals. We install concrete and clay profiles that meet those HVHZ standards, including the underlayment assembly, which matters as much as the tile itself. A pretty tile over a failed underlayment is a liability waiting for the next named storm.
Metal Standing-Seam Retrofit on Detached Shops and ADUs
Acreage lots in Coral Springs often include detached workshops, garages, or accessory units built on slabs near septic fields. We retrofit those with standing-seam metal, and we map the septic drain field before the first fastener goes in. Soil gases from drain fields corrode standard fasteners early, which is why cheap metal panels on a Coral Springs outbuilding lift and leak within five years. We spec fasteners that hold up.
Roof-to-Wall Flashing and Seal Failure Correction
The humidity off Coral Springs’s canal system eats aluminum and delaminates old underlayment behind stucco returns. We spend a lot of time correcting roof-to-wall transitions where original sliding glass door tracks have corroded and let water run behind the wall. That’s a full-frame issue, not a caulk-and-hope fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We install and service roofing systems built around elite product lines, including tile and metal profiles engineered for South Florida’s wind and humidity. For Coral Springs homeowners pairing a new roof with impact protection, we’re an authorized installer for CGI, CWS, and ES Windows products, along with ECO Window Systems. Because we stock common replacement profiles and flashing parts locally, turnaround on Coral Springs repairs doesn’t stall while someone in another state finds a part number. You call. We come. We fix it.
Common Shingle, Tile & Metal Roofing Problems We See in Coral Springs Homes
- Canal-facing slopes shed stormwater directly into waterway buffers. Without a Broward County stormwater discharge permit, a new roof’s faster runoff can erode the canal bank and trigger a county violation. We scope the permit path before we quote, not after demo starts.
- Original 1970s and 1980s tile underlayment delaminates behind stucco parapets. You can’t see it from the ground, but re-roofing reveals moisture-damaged top plates that only surface when the old tile comes off. If your Coral Springs home still has its original underlayment, plan for re-deck costs.
- Detached shop and ADU metal roofs fail early when fasteners sit near septic drain fields. Soil gases corrode standard fasteners and panels lift within five years. We map the field and spec corrosion-resistant fasteners before the first panel goes down.
- Aluminum sliding glass door tracks corrode from canal humidity and leak at the roof-to-wall junction. On canal-facing rear elevations, 40-plus years of moisture off the water means track corrosion and failed interlocks are the rule, not the exception. Those almost always need full tear-out and new flashing, not a glass-only swap.
Pricing for Shingle, Tile & Metal Roofing in Coral Springs, FL
A full shingle re-roof on a 1,800-square-foot Coral Springs CBS ranch runs $9,500 to $16,500. Concrete tile on the same footprint runs $16,000 to $32,000, and standing-seam metal runs $22,000 to $45,000 depending on panel profile, seam type, and the number of penetrations. Canal-facing slopes add cost because of the Broward County stormwater permit, access constraints from seawall setbacks, and the extra flashing work those rooflines demand. Detached shops and ADUs run $6,000 to $18,000 for standing-seam retrofit, including septic field mapping. We quote fixed, line-item numbers before any work starts, and estimates are free. Call (904) 913-5886 and we’ll put real numbers on your roof.
What Shingle, Tile & Metal Roofing Costs in Coral Springs
Here’s the honest anchor set for Coral Springs roofs in 2026:
- Architectural shingle re-roof: $9,500 to $16,500 on a standard CBS ranch
- Concrete tile replacement with HVHZ underlayment: $16,000 to $32,000
- Clay tile replacement: $18,000 to $38,000
- Standing-seam metal on a main home: $22,000 to $45,000
- Standing-seam metal on a detached shop or ADU: $6,000 to $18,000
- Full tear-off with re-deck: add $3,500 to $9,000 depending on how much sheathing has failed
What moves the price in Coral Springs specifically? Canal adjacency. A rear slope that drains toward a waterway setback needs a Broward County environmental resource permit for stormwater discharge, and access for tear-off often means hand-carrying tile from the street because seawall setbacks squeeze side yards to eight feet. Parapet condition matters too. Homes with original stucco parapets almost always need flashing reconstruction once we expose what’s behind them. Call (904) 913-5886 to schedule a free in-home measure and written quote. No change orders, no vague allowances.
Florida Pays You Back
Roofing in Coral Springs qualifies for a few programs worth knowing. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and a hardened roof assembly can count. Florida exempts impact-resistant roofing components from sales tax in many cases. On the federal side, the 25C energy credit returns 30% of product cost up to $600 per year on qualifying energy-rated units, though roof coatings and underlayments don’t always qualify, so ask your tax preparer. Finally, a wind-mitigation inspection ($75 to $150) can unlock windstorm premium credits averaging around 25% on the windstorm portion of your policy after a rated roof goes on. The final numbers belong to the programs and your carrier, not to us, but we’ll give you the paperwork trail to pursue every credit.
One more thing worth weighing if you’re pairing a roof with impact protection: impact-rated glazing permanently protects your home without panels to hang, track, or forget during a warning. Shutters have their place, but a rated roof and rated glazing together mean you never stand on a ladder as a storm closes in. We install the rated glazing. We don’t sell shutters.
We Also Serve Cities Near Coral Springs
Winslow Windows & Doors covers Shingle, Tile & Metal Roofing in Coral Springs and the surrounding Broward communities, including Margate, Coconut Creek, Pompano Beach, and Plantation. Same local crews, same county permitting knowledge, same 36500-Day Done Right Promise wherever your roof is. If you’re near Coral Springs and wondering whether we cover your street, call (904) 913-5886. Chances are we were there last week.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Shingle, Tile & Metal Roofing in Coral Springs
Yes, in most cases. Coral Springs sits in a master-planned canal system where rear slopes often drain toward waterway buffers, and a faster roof runoff from new materials can trigger Broward County environmental resource permit requirements for stormwater discharge. The city permit covers the building work. The county permit covers what happens to the water after it leaves your roofline. We scope both before we quote, so you’re not holding a stop-work order in month two.
Rarely. Concrete tile from the early 1980s has usually spalled past the point of safe reinstallation, especially on canal-facing slopes where humidity has worked on the tile body for 40-plus years. What’s more, the original underlayment underneath has almost certainly delaminated, and reusing an old tile over a new underlayment doesn’t fix the moisture damage behind the stucco returns. We’ll tell you honestly whether any tile is salvageable before you pay for a tear-off, but plan on replacement.
It changes how we fasten the roof, and it changes how we access the building. Septic drain fields on acreage lots in Coral Springs emit soil gases that corrode standard metal roof fasteners early, which is why cheaply fastened panels lift and leak inside five years. We map the drain field before we start and spec corrosion-resistant fasteners. We also keep equipment off the field during tear-off and staging so we don’t compact the soil or crush drain lines.
Because Coral Springs canals add permitting and access costs that a dry inland lot never faces. Canal-adjacent slopes need Broward County stormwater discharge permits, tear-off debris has to be kept out of the waterway, and seawall setbacks often reduce side access enough that tile has to be hand-carried from the street. Parkland doesn’t have that canal buffer requirement on most lots, so the same square footage costs less there. Call (904) 913-5886 for an exact quote on your roof, estimates are free.
We don’t recommend it, and in many cases code won’t allow it. A metal-over-shingle retrofit adds dead load that a 1970s CBS truss system wasn’t designed for, and you’re trapping the old underlayment’s moisture against the new panels. Worse, if your home still has original aluminum single-pane windows, the roof-to-wall flashing at those openings is already compromised by decades of canal humidity. Tear off first, fix the wall transitions, then install the metal. Your roof will actually shed water instead of hiding it.
Got a question we didn’t answer? Call (904) 913-5886 and talk to a live person. Ed’s name is on the door, and on every roof we put on in Coral Springs.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Coral Springs since founding the company in 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.