Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterPicture & Fixed Windows in Fort Lauderdale, FL | Winslow Windows & Doors
Picture windows deliver what no operable unit can: a clean, unbroken sheet of laminated impact glass framed as thin as engineering allows. For homes in Fort Lauderdale, that glass has to do more than hold a view. It has to hold against hurricane-force wind pressure, flying debris, and decades of salt air. Winslow Windows & Doors installs Picture & Fixed Windows across Broward County, with every opening set level, plumb, and square under AAMA 2400/2410 practice. We supply this product through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so your quote reflects the right configuration for your specific wind zone. Call (904) 913-5886 to schedule a free measurement.
Product Overview - Picture & Fixed Windows
A picture window is exactly what the name suggests: a non-operable panel built to maximize glass area and minimize frame. There is no sash, no track, no moving hardware. The laminated impact glass sits in a fixed frame, which lets the manufacturer engineer a thinner sightline than most casement or single-hung profiles. That is the appeal for Fort Lauderdale homeowners who want a wide view of the Intracoastal, a canal, or simply more daylight across a living room wall.
Architecturally, these units rarely work alone. The most common pattern we install in coastal Florida homes pairs a large fixed center panel with operable units on either side, often casement or horizontal roller windows. The fixed panel gives you the view. The operable units give you cross-ventilation. This arrangement is common in mid-century modern homes in Sailboat Bend, contemporary builds in Victoria Park, and virtually every waterfront renovation we handle in Fort Lauderdale.
The frame is where a picture window earns its hurricane rating. We offer this profile in aluminum and vinyl, depending on the opening, the wind zone, and the existing home’s construction. Aluminum carries larger spans. Vinyl offers thermal separation. Both are engineered to accept laminated impact glass with a PVB interlayer that holds shards in place if a frame is struck. That matters in Fort Lauderdale, where a picture window facing east or southeast takes the brunt of a storm’s leading edge.
Technical Specifications
- Product type: Non-operable Picture & Fixed Window (Impact Series)
- Frame materials: Aluminum or Vinyl, depending on structural span and wind zone
- Maximum size: Up to 120 inches wide, subject to design pressure calculations for your specific Fort Lauderdale location
- Glass options: Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass
- Finish options: White, Almond, Bronze, Black, Tan
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, verified on your specific quote
- Design pressure: Matched to your wind zone, up to +/-100, never higher
Sizing is the single biggest variable on this product. A 120-inch panel in a protected inland Fort Lauderdale neighborhood may carry a different design pressure rating than the same panel three blocks from the ocean in Harbor Beach. We calculate that before we order, not after.
Hurricane & Compliance Performance
Laminated Impact Glass - The glass is two panes bonded to a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack but the interlayer holds the pane in the frame. Water and wind stay out. This is the core mechanism behind every impact-rated picture window we install in Fort Lauderdale.
Miami-Dade NOA / Florida Product Approval - Each configuration carries a Notice of Acceptance and/or Florida Product Approval number. These are not blanket ratings; they are issued per frame, glass, size, and anchorage combination. We confirm the exact numbers on your quote before any permit submittal.
FBC / HVHZ Compliance - The profile is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ governs Broward and Miami-Dade counties. If your Fort Lauderdale home is in an HVHZ jurisdiction, this is the standard your window must meet, not a generic coastal rating.
TAS 201 / 202 / 203 Testing Context - These are the protocol family under which HVHZ-rated products are tested. TAS 201 covers large-missile impact. TAS 202 covers cyclic wind-pressure loading, simulating the repeated gusts of a full storm. TAS 203 covers forced-entry resistance. Any picture window we install has passed this protocol family for its approved configuration.
Design Pressure for Your Wind Zone - Design pressure is a PSF rating, not a wind speed. It measures the structural load the installed unit resists. We match design pressure to your wind zone, up to +/-100, never higher. Cookie-cutter ratings do not work in Fort Lauderdale, where exposure changes block by block.
Energy Performance Options - Low-E insulated glass is available for picture windows in climate zones where solar gain matters, which describes most of South Florida. The Low-E coating reduces heat transfer while the insulated air space helps keep the interior surface cooler to the touch.
Color & Glass Options
Fort Lauderdale residential architecture skews coastal contemporary, Mediterranean revival, and mid-century Florida modern. The finish you pick changes the look of the entire elevation. White and Almond read crisp on Spanish-style homes with stucco walls and barrel tile. Bronze and Black work well on contemporary builds with dark trim or aluminum exterior cladding. Tan splits the difference, warm enough for coral stone accents but neutral enough to fade into the background.
Glass selection is less about looks and more about performance. Clear laminated impact glass is the standard for maximum daylight and the truest view. Tinted glass cuts glare, which matters on west-facing walls in Fort Lauderdale where afternoon sun hits hard. Low-E insulated glass is the energy play, reflecting heat while preserving visible light. Every option we quote is the laminated impact configuration required for HVHZ compliance. A picture window is not decorative glass in this market; it is part of the building envelope.
Installation by Winslow Windows & Doors in Fort Lauderdale
A NOA-rated picture window installed wrong is not a NOA-rated window. The rating covers the manufactured unit and its approved anchorage method. Flashing, shimming, sealing, and fastening all have to match the tested assembly. That is why Winslow Windows & Doors treats every Fort Lauderdale install as a sequenced process, not a swap-out.
We start with a pre-install inspection of the rough opening. In older Fort Lauderdale homes, we frequently find rotted bucks, out-of-square openings, or previous flashing failures that would compromise a new unit. The opening gets corrected before the window goes in. Then the frame is set level, plumb, and square, shimmed at the anchor points, and fastened on the engineered schedule for that configuration. The perimeter gets an AAMA 812 low-expansion foam sealant, which fills the void without bowing the frame. We install per AAMA 2400/2410 standard practice for the full assembly.
After install, we run a water test at the sill and corners. Permitting awareness matters here: Fort Lauderdale sits in an HVHZ jurisdiction, so your window replacement likely requires a permit and a product approval submittal. We provide the numbers your permit package needs, because we are the dealer who ordered the units. That documentation chain matters to building officials in Broward County.
Coastal exposure changes things. A picture window facing the ocean in Fort Lauderdale Beach takes more wind-driven rain than one in an interior neighborhood off Sunrise Boulevard. We account for that in flashing design and sealant selection. If your project sits within a half-mile of the shoreline, expect that to factor into your quote and your installation details.
Frequently Asked Questions - Picture & Fixed Windows
The design pressure is matched to your specific wind zone, up to +/-100, never higher. Fort Lauderdale spans multiple wind zones depending on distance from the coast, so we calculate the required rating for your exact address before ordering. Call (904) 913-5886 and we will verify the rating your opening requires.
Lead time depends on the manufacturer, frame material, size, and finish. Custom picture windows in Fort Lauderdale typically run several weeks from approval to delivery, but the exact window varies by line. We confirm your lead time before you sign the order, not after.
In most Fort Lauderdale and Broward County permit applications, yes. The product approval documents the tested configuration, including the glass, frame, and anchorage details for your opening size and wind zone. We provide the approval submittal for the units we install, and we confirm the numbers match your specific quote.
Size is flexible within the structural limits of the profile. A picture window can span up to 120 inches wide, but the design pressure rating changes with width, height, and anchor spacing. Custom configurations are common on our projects; a fixed center panel flanked by operable units is one of the most requested layouts in Fort Lauderdale. We quote it per opening, not off a price sheet.
Wash the glass with mild soap and water, and wipe the frame down twice a year, more often if you are close to salt air in Fort Lauderdale. Check the perimeter sealant annually for cracks or shrinkage. Since the unit is non-operable, there are no tracks to clean, no rollers to lubricate, and no screens to maintain. That is part of why many homeowners choose this profile for hard-to-reach openings.
Get a Quote - Picture & Fixed Windows in Fort Lauderdale
Every picture window project starts with a measurement and a wind zone check, not a generic price. We will visit your Fort Lauderdale home, confirm what your openings require, and give you a written line-item quote with the exact NOA and Florida Product Approval numbers for your configuration. Call Winslow Windows & Doors at (904) 913-5886 to schedule a free on-site measurement and start your project.
Written by the team at Winslow Windows & Doors, serving Fort Lauderdale since our founding.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
