Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterWhy Fort Lauderdale Homeowners Choose ES Windows Windows & Doors
Winslow Windows & Doors provides independent Es Windows in Fort Lauderdale service, repair, and installation across the city, from the canal-front homes of Coral Ridge to the high-rises along Galt Ocean Drive. We’re not authorized by or affiliated with ES Windows, and we’re direct about that. What we offer is hands-on familiarity with their product lines: our techs open 30 to 40 ES Windows units a month in this city alone, so we know exactly how their frames, rollers, and balances hold up under Broward County salt air and HVHZ building code. If you own ES Windows in Fort Lauderdale and something isn’t sliding, sealing, or draining right, call (904) 913-5886 and we’ll tell you honestly whether it’s a repair or a replacement.
Why Trust Winslow Windows & Doors for Your ES Windows Windows & Doors?
Ed Winslow started this company in 2011 after years in the field, and his name is on the door, literally. That means when we open an ES Windows unit, we’re opening it the way we’d open one in our own house. Our technicians work on the 7600 Series single hung, the 8700 Series casement, the 3-lite roller (HXR) system, and the 5700 horizontal roller regularly enough that we can usually identify the failure before the sash is fully out of the frame. Ed learned the fundamentals at Miami Dade College’s construction trades program, then spent close to two decades measuring, fitting, and standing behind window and door work along Fort Lauderdale’s Las Olas corridor, where salt air and Atlantic storm seasons separate quality work from everything else. We use OEM-tolerance ES Windows replacement parts as our default, and every technician who shows up at your door is background-checked and in uniform. The 36500-Day Done Right Promise applies to ES Windows work just like everything else we do: if it’s not done right, we make it right.
Common ES Windows Windows & Doors Problems We Fix in Fort Lauderdale
Fort Lauderdale’s marine environment accelerates the normal wear patterns of ES Windows products. Here are the five failures we see most often, why they happen, and what they mean for your home.
- Roller assemblies seizing or popping out on the 3-lite roller (HXR) system. Wind-driven sand from the beach gets into the nylon wheels, grinds them down, and eventually flat-spots them. The center panel then drags, jumps the lower track, or refuses to move at all. This is the single most common ES Windows repair we perform in Fort Lauderdale, particularly in coastal neighborhoods like Harbor Beach and Las Olas Isles.
- Broken balances on the 7600 Series single hung. We regularly find original installations from the 2000s near the Intracoastal where the balance shoes have snapped or worn out. The sash drops hard when released, or hangs crooked in the frame. A new balance shoe set typically restores one-handed operation without touching the glass or frame.
- Stripped casement crank operators on the 8700 Series. The gear that meets the arm wears under repeated use, especially when the window faces persistent onshore wind and the sash gets muscled shut against pressure. You’ll feel the crank slip or hear a clicking sound as the gear teeth skip. Replacing the operator is a straightforward fix that should happen before hurricane season.
- Clogged weep holes backing water into the track. A mix of salt and fine sand accumulates in the small drainage channels on ES Windows frames. During Fort Lauderdale’s heavy summer downpours, water has nowhere to go, so it pools in the track and soaks the interior sill. This is a maintenance item we clear and verify on every service call.
- Corroded hardware on canal-front homes. Homes along Fort Lauderdale’s roughly 165 miles of interior canals sit directly on salt water. We see aluminum frames pitting and stainless hardware corroding years before the same components would fail inland. When we replace hardware on ES Windows units in waterfront locations, we specify marine-grade fasteners as a standard, not an upgrade.
One more thing worth saying plainly: if you’ve got ES Windows that have never been touched since original installation, and you’re in an older Fort Lauderdale neighborhood like Victoria Park or Sailboat Bend, the odds are good that at least one unit is already out of compliance with current HVHZ requirements. We’ll tell you what you need to know, not what you want to hear.
ES Windows Parts & Our Repair-vs-Replace Approach
We start with OEM-tolerance ES Windows replacement parts: roller kits, balance shoes, weatherstripping, crank mechanisms, and track caps. These match the original factory specifications and keep your warranty intact. When an OEM part has been discontinued or would put your repair behind a multi-week lead time, we’ll fit proven aftermarket hardware that meets or exceeds the original spec. We never install a part that we wouldn’t put in a window on our own building.
The repair-vs-replace decision comes down to the frame and the glass pack. If the extrusion is sound and the glass is intact, we repair. If the frame is pitted from salt exposure or the glass pack has seal failure or visible damage, we’ll quote a full-frame or insert replacement and explain the numbers honestly. You get a written line-item quote either way, so you know exactly what you’re paying for before we start. For a straight answer about your ES Windows unit, call (904) 913-5886, and the estimate is free.
Our ES Windows Service Process - Step by Step
- 1
Diagnosis. We inspect the full unit: sash, frame, rollers, balances, weatherstripping, weep holes, and hardware. On ES Windows products specifically, we check the interlock alignment on 3-lite rollers and the balance shoe seating on 7600 single hungs, because those are the two areas where small misalignments turn into big failures.
- 2
Repair or install. We remove the sash, replace the failed components, and clean the track and weep system before reassembly. For new installations, we set the frame plumb and square, then bed and seal every opening to HVHZ standard.
- 3
Test. We cycle every panel and sash multiple times, verify drainage with water, and check that the unit locks and seals properly. On casement operators, we test the full crank range under load. On rollers, we check glide resistance and panel alignment.
- 4
Warranty. Every ES Windows service we perform is covered by the 36500-Day Done Right Promise. Ed Winslow’s name is on the door, and on every job we do.
ES Windows Products We Service & Install in Fort Lauderdale
Our team works on the full ES Windows product range commonly installed in Fort Lauderdale homes and condominiums. That includes the 7600 Series single hung, the 8700 Series casement, the 3-lite roller (HXR) system, and the 5700 horizontal roller. We keep common ES Windows components in local stock for quick turnaround: roller kits, balance shoes, crank operators, track caps, and weatherstripping. For less common parts, our supplier relationships in South Florida typically get us what we need faster than a homeowner could source it alone. If you’re considering a new ES Windows installation or a full replacement of older units, we’ll pull the permit, handle the HVHZ product approval documentation, and pass the inspection. Our ES Windows work in Fort Lauderdale includes horizontal roller and sliding Impact Windows services, single hung impact windows, hurricane-proof front and entry doors, and ongoing window maintenance and care.
We Also Service These Brands
ES Windows is one of eight premium brands we install and service, alongside PGT, CGI, CWS, and ECO Window Systems. That matters because we’re not tied to a single manufacturer’s product line. When we recommend a repair or replacement, the recommendation is based on what’s right for your home, not on what we happen to sell.
FAQs - ES Windows Windows & Doors Service in Fort Lauderdale
The usual cause is worn or flat-spotted nylon rollers combined with a track cap that’s lifted or cracked from sand intrusion. Once the center panel loses its grip in the track, it jumps the rail under normal sliding force. We replace the roller assemblies and track cap, then realign the interlock so all three panels glide together. Call (904) 913-5886 and we’ll get it sorted before the panel drops or the glass binds.
Yes. That drop is a broken or disengaged balance shoe, which is a replaceable component inside the frame. On the 7600 Series, we see this most often on original installations from the 2000s near the Intracoastal, where salt air has worked on the balance springs. We replace the shoe set, re-tension the balance, and the sash operates one-handed again, without touching the glass or frame.
You’ll feel the crank slip or hear a clicking sound as the gear teeth skip, and the sash won’t pull tight against the weatherstripping. That’s a stripped operator gear, not a sash problem. We replace the crank operator, re-lubricate the hinge track, and verify the sash seals properly. The whole sash only needs replacement if the hinge itself is bent or the glass pack is compromised, which is much less common.
In Fort Lauderdale, that depends on the condition of your existing frames and whether the frame extrusion is rated to carry the heavier impact glass pack under HVHZ requirements. On some ES Windows lines, particularly the 7600 Series, the original frames simply aren’t engineered for that load. We’ll inspect the extrusion, measure the glass pocket, and tell you straight whether a glass-only upgrade is viable or a full-frame replacement is required. A free second opinion on any written estimate is yours just by asking.
The weep holes on your ES Windows frames are clogged with a salt-and-sand mix that’s common in Fort Lauderdale’s coastal air. Water has nowhere to go, so it backs up into the track and eventually soaks the interior sill. We clear the weep system, verify drainage with a water test, and can add weep hole covers if your frames don’t already have them. This is a five-minute fix on most units, and it’s part of every ES Windows service call we run.
Service calls and repairs vary by the specific failure and parts required, but a typical ES Windows roller or balance replacement in Fort Lauderdale runs between $140 and $380 per unit, depending on the model and whether OEM or aftermarket parts are used. Full-frame or insert replacements for ES Windows impact units start around $1,200 per opening and go up with size, glass package, and HVHZ compliance requirements. We quote written, line-item pricing before any work begins, and standing discounts apply: $40 off any repair over $200, and 10% off for seniors and veterans. Call (904) 913-5886 for an exact quote on your specific windows.
Book Your ES Windows Service in Fort Lauderdale, FL
If your ES Windows aren’t sliding, sealing, or draining the way they should, we’ll send a background-checked technician in a marked truck to diagnose the problem and give you a straight answer. Call (904) 913-5886 to schedule your free estimate. Ed Winslow’s name is on the door, literally, and that means it gets done right.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fort Lauderdale since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.