Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterCGI Impact Windows in Fort Lauderdale: What to Know First
CGI impact windows in Fort Lauderdale are a serious investment, and when they need service, you want someone who understands the product line, not someone learning on your sill. We provide independent CGI impact window repair and replacement across Fort Lauderdale, with most service calls diagnosed on the first visit and parts ordered the same day. Honest pricing comes standard: line-item quotes, no change orders, and a free estimate before any work begins.
This page is for CGI window owners in Fort Lauderdale dealing with fogged glass, failing rollers, stubborn tracks, or hardware that no longer locks with the authority it should. If you are in that boat, call (904) 913-5886 and someone will pick up, day or night, no phone tree.
How CGI Products Fail - and How We Fix Them
- Sentry Series balcony and sliding door rollers seize from salt and sand. Fort Lauderdale’s ocean breeze carries fine salt that works its way into CGI Sentry roller assemblies and corrodes the bearings from the inside. The door gets harder to move, then it grinds. We replace the roller cartridges with marine-grade stainless aftermarket sets rather than reusing the original hardware, because the OEM rollers will seize again in the same wind. It is a parts decision CGI owners rarely hear about until a door refuses to slide.
- Estate Collection casement crank mechanisms bind after hurricane-season wind flex. We see this a lot in Coral Ridge and Victoria Park. The operator gears inside the crank strip or the arm bends microscopically after repeated high-wind cycles, and suddenly the sash will not seat into the frame. We disassemble the operator, inspect the track for sand intrusion, and rebuild it with an OEM gear set when available, or a hardened aftermarket replacement when it gets the window sealing properly again.
- Tribute and Estate single-hung balances lose tension on west-facing walls. Afternoon sun in Fort Lauderdale bakes the balance springs inside the jambs, and they fatigue faster than CGI’s northern installations. The window drops when you let go, or worse, slams shut. We re-balance the sash to the glass weight and replace the balance cartridge, then set the sash so it holds open without the helper clips.
- CGI laminated glass units in bathroom windows show edge fogging from humid air intrusion. This is not necessarily a blown seal; it is often a desiccant strip that saturated early because of persistent humidity in the wall cavity. We confirm with a moisture meter before ordering a new insulated glass unit. That saves CGI owners money, because replacing glass unnecessarily is the most common upcharge we correct from other contractors’ quotes.
- Threshold and weatherstripping channels on CGI hinged doors wear unevenly in Florida downpours. The bottom sweep and jamb seals on CGI door units suffer from UV exposure plus standing water during summer storms. Once the sweep compresses or the jamb seal tears, driving rain finds the gap. We replace with OEM CGI weatherstripping where the frame is still true, and we re-shim the hinges when the door has settled, which is the part most people miss.
Our CGI Impact Windows Process
- 1
You call, a person answers. Not a call service. You will speak with someone who can schedule a Fort Lauderdale service visit and tell you exactly when the truck will show up. Ed Winslow’s name is on this company, and that sets the standard for the first minute of the call.
- 2
We diagnose the window or door on site. Our tech arrives in uniform, background-checked, and works through the sash, frame, glass, hardware, and seal. On CGI units we check impact glazing integrity, frame-to-opening fit, and all moving parts, including the ones that are not yet failing.
- 3
You get a written line-item quote. The price you see is the price the job costs. We explain what parts we are using, whether OEM CGI or a better-performing aftermarket alternative, and why.
- 4
We execute the repair or replacement. Whether it is a roller rebuild on a Sentry slider, a gas-strut replacement on a Tribute awning, or a full Estate casement re-glaze, the work is done carefully and cleaned up completely.
- 5
We test everything and walk you through the result. We cycle the window or door multiple times, check lock engagement, confirm drainage, and show you what changed. If a permit was needed, it is pulled and closed properly.
- 6
The 36500-Day Done Right Promise goes into effect. If it is not done right, we come back. Not for a year. Not for the length of a warranty card. For as long as Ed owns the company.
What CGI Impact Windows Cost in Fort Lauderdale
Most CGI impact window repairs in Fort Lauderdale run between $185 and $625 per unit, depending on the failure. A roller or balance replacement on one sash typically lands around $185 to $320. A hinge rebuild with weatherstripping on a Tribute or Estate door runs $275 to $450. A full glass pack replacement for a fogged CGI unit starts near $425 and climbs based on size and glazing spec. A complete CGI window replacement averages $1,200 to $3,400 installed, with architectural lines like the Estate Collection at the higher end.
Price moves on three things: glass size, frame condition, and whether the job is a repair or a full unit swap. You will know the number before you approve anything. Call (904) 913-5886 for a free written estimate on your specific CGI windows.
Why Fort Lauderdale Homeowners Call Winslow Windows & Doors for CGI Work
We have been doing this since 2011, and Ed Winslow has been measuring and fitting South Florida windows for going on two decades. That matters with CGI, because the install details are what determine whether the window performs in a storm, not just what it says on the sticker. We also work on PGT, CWS, ES Windows, and ECO Window Systems, so when a home has mixed brands, you are not calling three different companies. And behind every job is the 36500-Day Done Right Promise: if our work is not right, we make it right. A century-long standard. We are the one down the road, and we intend to stay there.
FAQs
We service CGI windows as an independent provider, not as a CGI-authorized agent. The warranty on your specific unit depends on CGI’s terms and what component failed. In many cases, hardware repairs and adjustments do not impact the warranty, and we will tell you honestly if we think a claim through CGI would serve you better than paying out of pocket for the fix.
Common components are in stock locally or reach us within three to five business days. Some Estate and Tribute hardware sets have longer lead times. We tell you the timing before you commit. Call (904) 913-5886 and we can check your specific series while you are on the phone.
If the frame is solid, the impact glass is intact, and the failure is mechanical, repair wins on cost. If the frame is rotted, the glass is compromised, or the window no longer seats squarely, replacement is the honest answer. We give you both options with real numbers and no pressure to overspend.
Yes. We install new CGI impact windows and doors, and we pull permits where required and close them when the work is done. Every new-build or replacement job gets the same 36500-Day Done Right Promise as a repair.
No. Our written quote is fixed unless you approve something in writing. If we uncover hidden damage, we stop, show you what we found, and give you a new line-item number before we proceed. No surprises on the invoice, ever.
If you own CGI impact windows in Fort Lauderdale and they need attention, call (904) 913-5886 for a free estimate. A live person answers, at any hour, and you will get the straight story on what it needs, what it costs, and when we can do it.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.