Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterCGI Door Installation: The Fort Lauderdale Owner’s Guide
CGI door installation in Fort Lauderdale typically runs $350-$900 installed for most parts and components, depending on the door model, the part that failed, and how much of the assembly needs to be rebuilt. We stock CGI-compatible hardware and parts on our trucks, and we can usually get a technician out the same day you call for a diagnosis. Most Fort Lauderdale homeowners don’t discover a problem until the door starts dragging, sticking, or letting daylight through a corner that used to seal tight. Then they walk outside, look closer, and realize a hinge has worn, a threshold has corroded, or a roller has finally given up after years of salt air and afternoon thunderstorms.
At Winslow Windows & Doors, we install and service CGI doors throughout Fort Lauderdale, and we’ve seen just about every failure mode South Florida can throw at an exterior door. We’re an independent service provider, not affiliated with CGI, but we’re an authorized installer of their products and we work with their hardware every week. If your CGI door isn’t closing, sealing, or latching the way it should, you’re in the right place.
Which CGI Models This Applies To
CGI builds several door lines that show up all over Fort Lauderdale, and the installation details vary between them. Most common are the Estate Collection and Sentinel Series, along with the Classic and TDL (True Divided Lite) lines on older homes. Your door should have a manufacturer label on the hinge edge or near the threshold, usually with the model name, the glass type, and a manufacture date. That label is the fastest way to identify the exact part you need, because CGI hardware isn’t always interchangeable between series even when the doors look identical from the street.
One compatibility gotcha we run into often: CGI impact doors built before roughly 2015 used hinge and roller hardware that has since been updated. A newer OEM hinge won’t always fit an older frame without modification. That’s the kind of detail that matters when you’re pricing a repair, and it’s why we stock both OEM CGI parts and quality aftermarket equivalents for the older lines. OEM parts carry the CGI name and an exact factory fit. Good aftermarket hardware from suppliers like G-U, Roto, and Truth can work just as well on some applications, and it usually costs 20-30% less. We’ll tell you which direction makes sense for your door based on its age, condition, and exposure.
In Fort Lauderdale specifically, salt air is harder on hardware than most people expect. We see hinge pins, roller bearings, and threshold screws corroding faster in neighborhoods east of US-1, where the ocean is a few blocks away. CGI’s stainless and aluminum components hold up well, but anything with a plated finish is on borrowed time near the coast.
Signs Your CGI Door Installation Is Failing
- The door drags or scrapes at the threshold. This usually means the hinges have worn enough to let the panel settle, or the threshold itself has shifted. On a 250-pound impact-rated door, a quarter inch of sag is enough to bind at the strike side.
- You can see daylight or feel air around the weatherstripping. The door’s seal has broken down, which means your air conditioning is leaking out and rain can find its way in. In Fort Lauderdale’s humidity, a bad seal also invites mold into the door frame within months.
- The multipoint lock won’t engage without force. CGI doors use a multipoint locking system, and these get finicky when the door settles or the hardware wears. Forcing the handle only makes the problem worse and can strip the gearbox inside the lock body.
- The door doesn’t close on its own or swings open by itself. That’s a hinge alignment or installation problem, and it’s a security issue on top of an annoyance. An impact door that won’t stay shut isn’t doing its job.
- Rust stains along the bottom edge or corner joints. This is corrosion eating the frame hardware or the internal steel reinforcement. Once you see rust on the outside, there’s often more hidden inside, and the fix gets more expensive the longer you wait.
Replacement Cost & What’s Included
Here’s what CGI door installation and parts replacement typically costs in Fort Lauderdale, installed:
- Hinge replacement: $40-$90 per hinge, including removal, fitting, and re-hanging the door.
- Roller replacement: $35-$75 per roller, depending on whether it’s a standard or heavy-duty impact-rated roller.
- Threshold repair or replacement: $90-$250, including new seal and fasteners rated for coastal exposure.
- Weatherstripping replacement: $60-$180, depending on the CGI model and how many sides need work.
- Multipoint lock assembly replacement: $250-$600, parts and labor. This is the one that catches people off guard, but the lock body and gear mechanism wear as a unit.
- Full door re-hang or installation adjustment: $200-$500, depending on how far out of square the frame has moved.
Every quote from Winslow Windows & Doors includes the part, the labor to install it, and a written line-item breakdown. No vague numbers. The work is backed by the 36500-Day Done Right Promise: if it’s not done right, Ed Winslow makes it right. Ed’s name is on the door and on every job we do, and we don’t hide behind fine print.
Two factors drive most price differences: the CGI series your door belongs to and whether hidden damage has spread beyond the part you called about. That’s why we prefer to look at the door before quoting anything final. You’ll always get a straight answer first.
DIY or Call Us?
There are a few things any Fort Lauderdale homeowner can safely check on a CGI door. Look at the hinge screws and see if they’re loose. Inspect the weatherstripping visually. Listen for scraping that tells you the panel has shifted. Those are all diagnostics. The actual repair is where we draw the line, because an impact-rated CGI door is not a standard builder-grade door. It weighs more, it’s engineered to stay sealed in a Category storm, and the hardware is tensioned to factory spec.
If your door has a multipoint lock, for example, the internal gearbox is not something to open up on a Saturday afternoon. If the panel is sagging, re-hanging it properly requires getting the frame plumb and the weight distributed across all hinges. Done wrong, the door won’t seal, the lock won’t engage, and you’ve taken a storm-rated product and quietly turned it into a liability for the next hurricane season. That’s not a theory. We’ve repaired DIY attempts in Victoria Park, Rio Vista, and Coral Ridge where homeowners spent a weekend and made things worse than they were on Friday.
Call (904) 913-5886 and we’ll send someone who knows CGI doors by feel, not by watching a tutorial. Estimates are free, and there’s no trip charge inside our home county.
FAQs
In Fort Lauderdale’s salt air and humidity, most CGI door hardware including hinges, rollers, and weatherstripping lasts 10-15 years before meaningful wear shows up, while the door slab itself can go 25 years or more when installed correctly. Coastal homes east of US-1 tend to run toward the shorter end of that range because the salt accelerates corrosion on plated metal parts.
It depends on the part. Worn rollers and hinges are replaced, not repaired, because the metal surfaces have physically worn away and no amount of adjustment brings them back. Lock assemblies can sometimes be cleaned and lubricated to extend their life, but once the internal gear teeth are stripped, the whole assembly needs to be swapped. Call (904) 913-5886 for an honest assessment of which side your door is on.
Most single-part replacements such as a threshold, hinge set, or weatherstripping take 1-3 hours on-site, and we carry the common parts on the truck. A full multipoint lock replacement can take slightly longer because the panel may need to come off. We’ll tell you upfront what the job requires and how long it will run before we start.
We stock the most common CGI door hardware on our trucks: hinges, rollers, thresholds, weatherstripping, and lock components for the Estate, Sentinel, Classic, and TDL lines. For unusual series or custom finishes, we order directly from CGI or our distributor and typically have the part within a few days. We also keep parts for PGT, CWS, and ES Windows doors in stock. Call (904) 913-5886 and we’ll confirm availability for your exact model over the phone.
Why Fort Lauderdale Homeowners Call Us for CGI Doors
This job is local, and we think it should stay that way. Winslow Windows & Doors has been installing and servicing impact-rated doors since 2011, and Ed Winslow has been measuring and fitting doors across South Florida even longer than that. Born and raised in Miami, Ed learned the trades at Miami Dade College, spent years in the field, and has stood behind work along Las Olas Boulevard and all through Fort Lauderdale’s older neighborhoods where salt air and hard storms separate quality work from everything else. Ed’s name is on the truck and on every job: “My name’s on the door, literally. That means it gets done right.”
When you call (904) 913-5886, a real person answers. Not a voicemail tree. Not a call center. That’s every day, 24/7. You’ll get an upfront quote with no surprises, and if a written estimate from another company has you confused, bring it to us and we’ll give you a free second opinion. Our published address and license number are on the site for anyone to check. We background-check and uniform every technician who shows up, so you know who’s walking through your gate before the truck stops.
CGI doors are built for South Florida. They deserve an installer who knows exactly what that means. We’re the one down the road.
Call (904) 913-5886 for a free estimate on CGI door installation in Fort Lauderdale. A live person will answer.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.