Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterCWS Custom & Geometric Windows in Fort Lauderdale: What to Know First
CWS custom and geometric windows in Fort Lauderdale can be serviced independently, and most repair or replacement jobs are completed in one to two visits once measurements and glass specs are confirmed. Winslow Windows & Doors is an independent CWS service provider - not a manufacturer rep, but a crew that has measured, ordered, and installed enough CWS arched, circular, and oversized units to know exactly what works in this climate. If you own a CWS shaped window that is fogged, leaking, or losing its seal along Las Olas or anywhere in Fort Lauderdale, you will find straight answers here, including what it actually costs to fix it.
Call (904) 913-5886 to talk through what you are seeing. A live person answers, day or night.
How CWS Products Fail - and How We Fix Them
Every window brand has patterns. CWS makes a lot of impact-rated custom shapes, which is a good thing in Fort Lauderdale, but shaped windows concentrate stress at corners and curves. Here is what we actually see on service calls.
- Arched and radius units losing argon gas at the curve. CWS arch windows and true radius tops tend to develop seal failure along the bent sections first, not the straight runs. The spacer bar has to flex around that curve, and after enough South Florida heat-and-salt cycles, the seal lets go. The tell is a gray, milky haze inside the glass near the top of the arch. The fix is an insulated glass unit replacement built to the original radius, not a retrofit panel that flattens the curve.
- Geometric picture windows with frame racking from settlement. Triangles, trapezoids, and octagons have more frame joints than a standard rectangle. In older Fort Lauderdale neighborhoods like Victoria Park and Sailboat Bend, decades of settling plus hurricane tie-downs can put slight torsion on the frame. You will see a hairline gap at one corner or feel a faint draft. We shim, re-anchor, and refit the sash before the glass itself is compromised.
- Oversized CWS sliders with worn roller assemblies. Large custom horizontal sliders from CWS carry a lot of glass weight. After years of daily use in sandy air, the rollers grind down and the panel drags or binds. We replace rollers with units matched to the weight rating, not generic hardware-store parts that fail again in two years.
- Water intrusion at custom-radius perimeter flashing. Shaped windows need custom flashing because the head of the window is not a straight line. We often find original installations with straight flashing bent around a curve, which leaves a shallow lip where water pools. On Fort Lauderdale homes with barrel tile or flat roofs, that becomes a slow leak. We remove the old flashing, fabricate a radius-matched piece, and reseal with commercial-grade sealant rated for coastal exposure.
- Impact glass delamination in coastal exposure. CWS impact units are built tough, but the laminated interlayer can start to separate at the edges after years of direct salt-laden wind, especially on east-facing elevations in Fort Lauderdale. You will see a whitish edge at the glass perimeter. Once delamination starts, the glass still holds, but its impact rating is compromised. We replace the unit before the next big storm tests it.
Our CWS Custom & Geometric Windows Process
Here is what an independent CWS custom window job looks like from the first call to the final wipe-down.
- 1
Call and describe the issue. We ask for the window shape, rough dimensions, and what you are seeing - fogging, sticking, leaks. Photos help us prepare before we roll a truck.
- 2
On-site diagnosis. We measure the unit precisely, including the radius on arched and curved glass, and inspect the frame, flashing, and hardware. Ed Winslow or a senior tech handles every CWS geometric window, because these units are too easy to mis-order.
- 3
Parts decision. We determine whether OEM CWS-matched components or a higher-quality aftermarket equivalent makes more sense. For glass, we always match the radius and impact rating. For hardware, we only use components rated for the unit’s weight and coastal conditions.
- 4
Order and fabrication. Custom insulated glass units are ordered to exact measurements. Standard patterns turn around in about two weeks; true custom radius glass can take longer depending on the supplier queue.
- 5
Installation and cleanup. We remove the old unit, prep the opening, install the new glass and hardware, and flash and seal for Fort Lauderdale’s wind-driven rain. The work area gets cleaned up before we leave.
- 6
Test and verify. We operate the window fully, check the seal, and confirm the glass is seated correctly before we hand you the invoice. If anything is not right, the 36500-Day Done Right Promise covers it.
What CWS Custom & Geometric Windows Costs in Fort Lauderdale
Straight numbers, because you deserve them. Note that every job is priced after we see the window, but these ranges hold true for most Fort Lauderdale CWS work.
| Service | Typical Cost Range |
|---|---|
| Insulated glass unit replacement, standard CWS arch window | $700 - $1,400 |
| True radius / curved CWS glass replacement | $1,200 - $2,800 |
| Full CWS geometric window replacement (frame + glass) | $1,800 - $4,500+ |
| Hardware repair on oversized CWS slider (rollers, track alignment) | $250 - $600 |
| Reseal and reflash of CWS shaped window perimeter | $300 - $750 |
Price moves with the radius tightness, the impact rating you are matching, and whether the frame itself is still sound. A free second opinion on any written estimate is always available, and seniors and veterans get a permanent 10% discount. Call (904) 913-5886 for an exact quote - estimates are free.
Why Fort Lauderdale Homeowners Call Winslow Windows & Doors for CWS Work
We have been doing this since 2011, and Ed Winslow’s name is on the door - literally. That means it gets done right. The 36500-Day Done Right Promise is our standing commitment: if the work is not right, we come back and make it right. No fine print, no arguing. Every tech who steps onto your Fort Lauderdale property is background-checked and in uniform, and a live person answers the phone 24/7. When a CWS unit is beyond practical repair, we can also quote replacement work in PGT, CGI, ES Windows, and ECO Window Systems - eight authorized brands total, so you get the right product for the application instead of a one-brand sales pitch. Upfront pricing, no surprises on the invoice.
FAQs
As an independent CWS service provider, we are not bound by, nor do we claim to represent, CWS warranty terms. That said, replacing an insulated glass unit is standard service work and generally does not void a frame warranty, though you should confirm with CWS directly on any active coverage. We build every replacement to match the original specs, which is what matters for preserving the window’s structural performance.
Yes. We template every arch and curve on site, then order glass with that exact radius. A generic panel that “kind of fits” ruins the look and puts stress on the frame, so we measure twice and order once. This is the difference between a window that looks restored and one that looks patched.
Most CWS custom window repairs take a single visit of two to four hours once the glass or hardware is on hand. The variable is glass fabrication time, which runs about two weeks for common arched shapes and three to five for tight-radius curved pieces. We give you a straight timeline at the estimate, not a vague “soon.”
If the frame is square and intact, repair is almost always the better value. Replacing only the glass or hardware doubles or triples the life of your existing window for a fraction of replacement cost. If the frame is rotted, racked, or the impact rating is already compromised, replacement makes more sense - and we will tell you honestly if it does. Call (904) 913-5886 and we will walk through your specific window together.
When the scope requires it - full window replacement or structural work - yes, we pull the necessary permits and the job is inspected. Glass-only repairs and hardware swaps generally do not require a permit. We will tell you upfront which applies to your job so there are no surprises when the invoice comes.
That is the straight story on CWS custom and geometric windows in Fort Lauderdale. If your arch is fogging, a curved corner is leaking, or a triangle window is pulling away at the frame, call (904) 913-5886. We will send someone who knows what they are looking at. We are the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.