Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterCGI Roof Repair in Fort Lauderdale: What to Know First
CGI roof repair in Fort Lauderdale is specialized work that most roofing crews aren’t equipped to handle correctly. We’re an independent CGI service provider, and we typically complete most CGI roof repairs within 2 to 5 business days depending on parts availability and the extent of the damage. Honest pricing starts with a free on-site assessment, and we never change the number once we’ve given it to you in writing.
This page is for homeowners in Fort Lauderdale who own a CGI roof system, have noticed a leak or visible damage, and want a repair crew that actually understands the product. Call (904) 913-5886 for a free estimate.
How CGI Products Fail - and How We Fix Them
CGI makes a range of roofing products, and each line has its own failure patterns in South Florida’s climate. Here’s what we actually see on Fort Lauderdale rooftops and what we do about it.
- CGI Stone-Coated Steel (the most common line we service): The stone coating can chip or wear thin at fastener points after years of thermal expansion and salt exposure along the coast. We often see this on homes near Las Olas Isles where salt spray sits on the roof between rains. Our fix: we remove the damaged panels, check the underlayment beneath (which is usually where the real leak starts), replace any compromised flashing, and reinstall with new OEM-spec fasteners and gaskets. The stone coating itself isn’t field-repairable to factory condition, so panel replacement is the honest repair here.
- CGI Standing Seam Metal Roofs: The seam clips can loosen over time from hurricane-force wind cycling. A loose clip lets the panel lift just enough to break the seal at the ridge or eave, and water finds its way in during a driving rain. We re-secure the clips, re-seal the seam joints with the proper butyl tape and sealant, and torque fasteners to manufacturer spec. This is a repair that fixes the cause, not just the symptom.
- CGI Barrel Tile Profiles: The tile-to-deck interface is the weak point, especially at valleys and around roof penetrations like vents and skylights. Fort Lauderdale’s afternoon thunderstorms dump water fast, and any gap at a valley flashing gets exposed quickly. We pull the affected tiles, inspect the flashing beneath, replace or re-bed it, and reset the tiles. Most crews just caulk over the crack and leave. That fails within a season.
- CGI Underlayment Failures (all lines): The underlayment beneath any CGI roof has a service life, and in Fort Lauderdale’s heat and humidity it can degrade faster than the roof covering above it. If you’re seeing stains on the ceiling but the roof surface looks fine from the ground, the underlayment is often the culprit. We diagnose this with a moisture survey and repair the affected section without replacing the whole roof.
- Improper Prior Repairs: We’ve been called to fix more than a few CGI roofs in Fort Lauderdale where a previous contractor used generic caulk or the wrong sealant on a stone-coated or metal panel. That’s a recipe for a repeat leak within months. We strip out the wrong material, clean the surface properly, and redo the repair with products compatible with the specific CGI line.
Our CGI Roof Repair Process
Here’s how a CGI roof repair with Winslow Windows & Doors actually goes, from the first call to the final walkaround.
- 1
Call and schedule: When you call (904) 913-5886, a live person answers and schedules your free assessment. No voicemail loops, no call center.
- 2
On-site diagnosis: We inspect the roof surface, the underlayment, the flashings, and the attic or ceiling below the affected area. We take photos and show you exactly what’s failing.
- 3
Parts decision: We tell you plainly whether the repair calls for OEM CGI components or a quality aftermarket equivalent. If OEM is the right call for your warranty or your peace of mind, we source it. If aftermarket is functionally identical and saves you money, we tell you that too.
- 4
Written estimate: You get a line-item quote before any work starts. The number on that sheet is the number you pay. No change orders, no surprise line items.
- 5
The repair: A background-checked, uniformed technician completes the work, using the correct materials and fasteners for your specific CGI product line.
- 6
Test and guarantee: We water-test the repair where practical, walk you through what we did, and stand behind it with the 36500-Day Done Right Promise. If it’s not done right, we make it right.
What CGI Roof Repair Costs in Fort Lauderdale
CGI roof repair in Fort Lauderdale typically runs between $350 and $1,800 for the most common repairs. Small jobs, like re-sealing a few loose seam clips or replacing a section of flashing, usually fall in the $350 to $600 range. Panel replacement on a stone-coated steel roof, depending on how many panels are involved, runs from $500 to $1,200. Underlayment repair beneath a section of roof can push toward the $1,500 to $1,800 end if the decking needs attention too.
What moves the price: the number of panels or tiles involved, whether the underlayment needs work, accessibility (a steep pitch or a two-story Fort Lauderdale home costs more to work on safely), and whether OEM parts are required. We also offer $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Every estimate is free. Call (904) 913-5886 for exact pricing on your roof.
Why Fort Lauderdale Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow grew up in Miami and has spent nearly two decades installing and repairing impact-rated products across Fort Lauderdale, including plenty of roofs along the Las Olas corridor where salt air and hard Atlantic storms punish every weak point. Ed’s name is on the door - and on every job we do.
We’re locally owned and have been since 2011, with a published address and license number. Every technician who steps onto your property is background-checked and in uniform. And our 36500-Day Done Right Promise means if the repair isn’t right, we come back and make it right. No fine print, no expiration.
And while CGI is a big part of what we service, we also work on PGT, CWS, ES Windows, and ECO Window Systems products. So if your Fort Lauderdale home has a mix of brands across windows, doors, and roof, you’re not juggling three different contractors.
FAQs
It can. CGI’s roof warranties typically require that repairs be performed by a qualified contractor using appropriate materials, and DIY repairs with the wrong sealant or fasteners are a common reason claims get denied. As an independent CGI service provider, we make sure repairs are done in a way that keeps your warranty intact where possible. Call (904) 913-5886 to have us look at it before you patch it yourself.
In most cases, yes. We source OEM CGI panels and tiles in the original color and profile when they’re available, and when a specific color has been discontinued we’ll tell you that honestly and walk you through your options. The goal is a repair that doesn’t look like a patch. Call (904) 913-5886 with your CGI product info and we can check parts availability for you.
That depends on the age of the roof, the extent of the damage, and the condition of the underlayment. A roof with a localized leak and sound decking is usually a repair. A roof that’s nearing the end of its underlayment service life and leaking in multiple places is often a replacement. We’ll give you an honest recommendation either way, and we’ll never push a replacement when a repair makes more sense. Estimates are free.
For active leaks in Fort Lauderdale, we prioritize calls and can typically get an assessment scheduled within 48 hours. A live person answers the phone 24/7, so you’re not waiting until Monday to talk to someone. Call (904) 913-5886 and we’ll get you on the schedule.
Most minor roof repairs in Fort Lauderdale don’t require a permit, but when the scope of work crosses the threshold that does require one, we pull the permit and handle the inspection process. You won’t need to manage it yourself. Call (904) 913-5886 and we’ll tell you what the rules are for your specific job.
If you own a CGI roof in Fort Lauderdale and need a repair, call (904) 913-5886 today for a free estimate. Upfront pricing, a real person on the phone, and a repair crew that actually knows the product. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.