Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterPGT Roof Repair in Fort Lauderdale: What to Know First
PGT roof repair in Fort Lauderdale typically runs $275 to $850 for most sealant, flashing, and fastener work on PGT skylights, roof windows, and impact-rated roof assemblies, with most jobs completed in a single visit. As an independent PGT service provider, Winslow Windows & Doors handles leak diagnosis, storm-damage repair, and seal replacement on PGT units across Fort Lauderdale without manufacturer restrictions dictating parts or timeline. If water is getting past a PGT skylight or roof-window curb, call (904) 913-5886 and a real person answers. This page is for Fort Lauderdale homeowners with existing PGT roof products who need straight answers on failure causes, repair costs, and whether a fix will actually hold through the next hurricane season.
How PGT Products Fail - and How We Fix Them
PGT builds tough products for Florida’s wind loads, but no seal, flashing, or fastener lasts forever in Fort Lauderdale’s salt air and relentless UV. Here’s what we find when a PGT roof unit starts leaking or binding, and what we do about it.
- PGT Vista fixed skylights: sealant breakdown at the curb joint. The most common call we get in Fort Lauderdale is water staining around a PGT Vista skylight where the aluminum frame meets the roof curb. The factory sealant on early-run Vista units degrades faster in coastal salt exposure than inland, and once it pulls away, wind-driven rain works its way under the flashing. We cut out the failed seal, mechanically re-secure the curb-to-deck connection, and bed the frame in a marine-grade polyurethane sealant rated for South Florida’s expansion and contraction cycles.
- PGT panoramic roof windows: bent or stripped operator hardware. Larger PGT roof windows, including panoramic venting models, use a chain or crank operator that takes a beating from wind buffeting and repeated cycles. Builders often miss the factory torque spec on installation, which means the hinge screws work loose over time and the sash pulls out of alignment. We re-align the sash, replace the worn operator with the correct torque-rated hardware, and re-tension the springs so the unit closes tight against the gasket instead of leaving a quarter-inch gap a storm will find.
- PGT impact-rated roof glass: gasket compression loss after storm cycles. Impact-rated PGT units like the WinGuard line, when installed in a roof application, rely on compression gaskets to keep water out while the frame flexes under wind load. After repeated stress, those gaskets lose their memory and stop shedding water even without visible damage to the glass. This is a classic Fort Lauderdale pattern: no cracked pane, no broken frame, just steady dripping after every hard rain. We replace the gaskets with PGT-compatible profiles and re-set the glass with the correct bite pressure, something a generic roofer without window experience rarely gets right.
- Fastener corrosion at the anchor points. On steel or concrete decks in Fort Lauderdale, the anchor fasteners holding PGT frames down are where we see the earliest metal fatigue. Coastal air has a chloride content that eats cheap fasteners in five years or fewer. We use stainless or coated anchors matched to the substrate, not whatever came off the supply-house shelf. When we pull a rusted anchor and see it’s half its original diameter, that’s usually the whole story behind a leak that three companies couldn’t find.
- Improper previous repairs with generic parts. A surprising number of PGT roof repairs we take over in Fort Lauderdale failed because someone used aftermarket glazing tape, generic gaskets, or off-brand operators to save fifty dollars. PGT tolerances are tighter than generic replacements allow. We source either OEM PGT components or verified matching equivalents, never universal-fit shortcuts. If an earlier patch job failed, we document why and fix it so it doesn’t fail the same way again.
Our PGT Roof Repair Process
Here’s how a PGT roof repair with Winslow actually goes, from the first call to the final inspection:
- 1
Call and talk to a person. You reach us at (904) 913-5886, day or night, and describe what you’re seeing: staining, dripping, binding, or visible seal failure. We ask about the PGT model if you know it, and we’ll help you find the unit label if you don’t.
- 2
On-site diagnostic. A background-checked, uniformed technician arrives and inspects the full assembly: frame condition, flashing, sealant lines, gasket compression, operator function, and anchor integrity. We tell you what’s failing and what’s still holding.
- 3
Parts decision. We determine whether OEM PGT components are needed or if a verified matching equivalent will perform identically. You get the trade-off in plain language, including price difference and warranty implications.
- 4
The repair. We perform the work: seal replacement, re-flashing, gasket replacement, operator repair, or anchor replacement, using materials rated for Fort Lauderdale’s salt and UV exposure.
- 5
Water test and wind check. We test the repair with a controlled water spray and verify seal compression, then inspect the surrounding roof membrane so we don’t hand you a fixed PGT unit still sitting in a leaking curb.
- 6
Walkthrough and guarantee. Ed Winslow’s name is on the door. Literally. That means it gets done right. You get our 36500-Day Done Right Promise: if it’s not right, we come back and make it right.
What PGT Roof Repair Costs in Fort Lauderdale
PGT roof repair pricing in Fort Lauderdale reflects the parts and the labor, not vague “roof leak” markups. Here are the ranges we see most often:
- Skylight seal replacement: $275-$450, depending on curb size and access. This is the most common PGT repair and typically a single-visit fix.
- Flashing and curb re-work: $400-$700 when the leak is at the roof-to-curb transition rather than the unit itself. Requires removal and re-bedding of the existing flashing.
- Gasket replacement (impact units): $350-$600 for compression gasket replacement on WinGuard or comparable roof-installed units. Parts are unit-specific, and matching the correct durometer matters.
- Operator and hardware repair: $180-$350 for venting roof windows with stripped or worn operators. OEM operators run toward the higher end of that range.
- Anchor and fastener replacement with corrosion remediation: $500-$850 when multiple anchors have degraded and need replacement plus surface treatment of the corroded area.
What moves the price? Roof pitch, access height, whether the unit is over a finished room that needs protection during the work, and whether a previous repair has to be undone first. We give written, line-item pricing before work starts and we honor it. No change orders, no “found something else” surprises. Call (904) 913-5886 for a free estimate, and remember: any repair over $200 gets $40 off, and seniors and veterans always get 10% off.
Why Fort Lauderdale Homeowners Call Winslow Windows & Doors for PGT Work
Because we’re the one down the road. Ed Winslow started this company in 2011 and put his own name on it, the published address is real, and the license is public. When you hire us for a PGT roof repair in Fort Lauderdale, you’re not getting a dispatch from a call center in another state. You get a live person at (904) 913-5886, a uniformed tech who’s been background-checked, and a repair backed by the 36500-Day Done Right Promise. We’re also authorized for seven other premium brands: CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. So if your Fort Lauderdale home has a mix of PGT and other impact products around the roof, one crew handles it all. Born and raised in Miami and trained in construction trades with years on Las Olas corridor jobs, Ed knows what salt air and Atlantic storms do to a roof assembly better than most. No vague estimates, no disappearing crews, and no warranty that evaporates after the check clears.
FAQs
PGT warranties generally cover manufacturing defects in the glass and frame, not site-applied sealant, flashing, or hardware that fails from installation or environmental factors. That said, a repair done with incorrect parts or methods can compromise the unit’s impact rating and could give PGT cause to deny a claim on that unit. As an independent provider, we use PGT-compatible components and don’t touch what doesn’t need touching, so your factory coverage stays intact. Call (904) 913-5886 if you’re unsure whether to file a warranty claim or pay for a repair outright; we’ll tell you straight.
Most PGT skylight seal and flashing repairs in Fort Lauderdale are completed within a single visit, usually three to six hours including diagnostics and water testing. If the roof curb itself has rotted or the deck is damaged, the job takes longer because the repair scope expands. Call (904) 913-5886 to schedule a free estimate, and a person answers, any hour.
We use OEM PGT parts when the repair demands them, particularly for operators, impact-rated gasket profiles, and structural anchors. For common wear items like exterior sealant and flashing, we use materials that meet or exceed PGT specifications and are sized for South Florida’s heat and salt exposure. If a generic part will hold as well as an OEM one, we’ll tell you and pass along the savings. If it won’t, we won’t use it.
If the frame is sound, the glass is intact, and the leak is at the sealant, flashing, or gasket level, repair makes sense and you’ll get years more service. If the frame is corroded through at the corners or the glass itself is delaminating, replacement is the honest call. We don’t sell jobs that should be repairs, and we don’t patch units that belong in a dumpster. Bring us in before you decide; a free estimate and a straight answer cost you nothing.
That pattern is almost always thermal expansion. In summer, Fort Lauderdale’s heat expands your roof deck and the aluminum PGT frame at different rates, which opens micro-gaps in the sealant at the curb joint. When cool weather comes back, the materials contract and the gap closes. Over time those gaps widen and the leak becomes year-round. The fix is cutting out the old sealant and replacing it with a high-movement sealant design for this exact cycle. It’s a specific issue we see all over Fort Lauderdale, and it’s one of the reasons generic roofing fixes on PGT products don’t last.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.