Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterMr-Glass Windows & Doors in Fort Lauderdale, FL | Winslow Windows & Doors
We’re Winslow Windows & Doors, and we provide independent Mr-Glass service across Fort Lauderdale, FL. Quick answer: yes, we work on Mr-Glass 8100, 8300, 8400, and 8600 series windows and doors, and the single biggest thing that separates our Mr-Glass work here is knowing which units will pass Broward County’s High-Velocity Hurricane Zone inspection and which ones are better off replaced. We’ve been doing this since 2011, and we stock OEM-compatible parts locally so most repairs don’t wait on a freight truck. Call (904) 913-5886 for a free estimate.
Why Fort Lauderdale Residents Choose Us for Mr-Glass Service
Mr-Glass windows and doors are built in South Florida, so you’d think every contractor in Fort Lauderdale would know them cold. They don’t. We’ve pulled apart enough Mr-Glass 8300 horizontal rollers and 8400 casements over the past 15 years to know exactly where they fail along canal-front streets and inland CBS ranch neighborhoods alike. Ed Winslow cut his teeth measuring and fitting windows along the Las Olas corridor, where Atlantic salt spray separates quality hardware from everything else in about three seasons. That’s why we use OEM Mr-Glass rollers, balances, and seals where available, and marine-grade aftermarket components on older lines where the original parts have been discontinued. Independent service, no manufacturer tie-ins, and a live person answers when you call.
Common Mr-Glass Windows & Doors Problems We Solve in Fort Lauderdale
These are the failure modes we actually see in Fort Lauderdale, not a national call center’s checklist:
- Salt-air pitting and seized roller assemblies. Along the 165 miles of interior canals, Mr-Glass aluminum sash channels and rollers pit and seize within 5 to 7 years without marine-grade anodizing. We see this constantly in Coral Ridge and Lake Ridge homes. The fix is usually new stainless rollers and re-alignment, not a full tear-out.
- Weep-hole blockage causing sill leaks. Wind-driven debris and organic buildup clog Mr-Glass horizontal roller weep holes during hurricane season. Water backs up and runs inside at the sill. It’s almost never a glass failure, but you’d be surprised how many homeowners get quoted for a full sash replacement before someone checks the weep channels.
- Thermal break delamination on older frames. Intense South Florida UV and year-round humidity delaminate the thermal break on older Mr-Glass frames. You’ll see interior condensation and feel heat radiating through what should be an insulated frame. Once the break separates, the window’s energy performance drops fast.
- Stripped or corroded casement hinge screws. Mr-Glass 8400 and 8600 casement hinges use stainless adjustment screws, but repeated crank operation in salty, humid air wears them down. The crank turns, but the sash doesn’t seat, and eventually the hinge binds completely.
- Pre-HVHZ glass packages failing inspection. When Fort Lauderdale inspectors flag older Mr-Glass installations during a post-storm permit pull, the issue is usually glass that predates current HVHZ impact codes. At that point, patching isn’t an option, and we walk you through a full replacement quote with accurate NOA documentation.
Mr-Glass Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Here’s the thing most window companies won’t tell you until after they’ve quoted you: Fort Lauderdale sits inside Broward County’s High-Velocity Hurricane Zone, one of only two counties in Florida that carries that designation. Miami-Dade is the other. What that means for Mr-Glass owners specifically is that any replacement window or door must hold a Miami-Dade Notice of Acceptance or a Florida Product Approval rated explicitly for HVHZ. You cannot legally install standard impact-rated product sold in Orlando or Tampa here, even if it carries a Florida Product Approval, so proper Window Installation in Fort Lauderdale must follow HVHZ rules. We pre-screen every Mr-Glass product approval before we quote a job in Fort Lauderdale, because an inspector will reject a non-HVHZ unit every single time, and then you’re stuck paying to redo the work. In neighborhoods like Progresso Village and Sailboat Bend, where 1950s and 1960s CBS ranch homes still carry original jalousie windows, that rejection risk is even higher, because the old openings rarely fit modern Mr-Glass impact frames without full frame replacement.
Mr-Glass Models & Products We Service in Fort Lauderdale
We service the full Mr-Glass residential lineup you find in Broward County:
- Mr-Glass 8100 Series Single Hung: balance replacements, sash re-glazing, lock alignment, and HVHZ compliance checks.
- Mr-Glass 8300 Series Horizontal Roller: roller assembly replacement, track repair, weep system clearing, and sill leak diagnosis.
- Mr-Glass 8400 Series Casement: hinge replacement, crank mechanism repair, seal replacement, and frame straightening.
- Mr-Glass 8600 Series Awning: hinge and operator service, weathering seal replacement, and glass package upgrades to impact-rated.
For parts, we follow a simple rule: OEM Mr-Glass components whenever they’re available locally or on short lead time. When an older Mr-Glass line has been discontinued or the factory lead time stretches into months, we specify marine-grade aftermarket rollers, balances, and seals that match or exceed the original duty. If the frame itself has pitted to structural thickness or the glass predates HVHZ impact requirements, we’ll tell you straight that replacement beats patching, and we’ll put the numbers in front of you before you decide. For Mr-Glass sales & service, that’s how we’ve always operated.
Mr-Glass Service Pricing in Fort Lauderdale
Mr-Glass repair pricing in Fort Lauderdale runs higher than inland Florida because of HVHZ product requirements and the marine-grade materials this climate demands. Here’s what you should expect to pay:
- Roller assembly replacement: $85 to $160 per sash, depending on the Mr-Glass series and whether we’re installing OEM or marine-grade aftermarket rollers.
- Casement hinge and crank repair: $120 to $220 per window, including labor and replacement hardware.
- Balance replacement (8100 Series single hung): $95 to $180 per window.
- Sill leak diagnosis and weep system repair: $110 to $240, depending on access and whether interior trim removal is needed.
- Full Mr-Glass frame replacement with HVHZ impact glass: $850 to $2,400 per opening, driven by size, series, and whether full frame replacement is required for the existing rough opening.
Every estimate is free, itemized, and fixed once we quote it. No change orders, no “we found something else once we opened the wall” renegotiations. Call (904) 913-5886 for your free estimate, and we’ll pre-screen the Mr-Glass product approval for HVHZ compliance before we quote, so you’re not paying for a solution an inspector will reject.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Windows & Doors in Fort Lauderdale
Rarely. Fort Lauderdale’s HVHZ rules require the entire window unit, frame and glass together, to pass a Miami-Dade NOA or HVHZ-rated Florida Product Approval. Unless your existing Mr-Glass frames are current-generation HVHZ-rated units with a matching NOA for impact glass, you cannot add impact glass to old frames and expect to pass inspection. We’ll check the product approval on your existing units before quoting, and if the frames don’t qualify, we’ll price a full Mr-Glass replacement instead. Call (904) 913-5886 for a free evaluation.
Salt air. Fort Lauderdale’s persistent onshore Atlantic winds push salt-laden moisture deep into residential streets, and the roughly 165 miles of interior canals hold that salt air close to homes. Standard aluminum with basic anodizing pits and seizes within 5 to 7 years in this environment. Marine-grade anodizing, thermally broken aluminum, and stainless fasteners aren’t upgrades here; they’re the minimum specification if you don’t want to replace hardware every few years. We stock marine-grade aftermarket components for Mr-Glass units specifically because of this.
No. Broward County enforces HVHZ compliance on every replacement window and door installed in Fort Lauderdale. Each Mr-Glass product must carry a Miami-Dade Notice of Acceptance or a Florida Product Approval explicitly rated for HVHZ. We verify that approval before quoting anything, because installers who skip this step leave homeowners with failed inspections and rework costs. If your selected Mr-Glass product doesn’t carry the right approval, we’ll tell you before any money changes hands. Call (904) 913-5886 to have your existing units checked.
Almost never. In Fort Lauderdale, sill leaks on Mr-Glass 8300 horizontal rollers trace back to clogged weep holes or failed sill dams, not broken glass. Wind-driven debris and organic buildup block the weep channels during hurricane season, and water backs up inside the track. We clear the weep system, check the sill dam and end caps, and usually resolve the leak without touching the glass. If the issue is a failed seal or degraded frame, we’ll show you exactly what’s failing. Call (904) 913-5886 for a free diagnosis.
In most cases, yes, we can replace just the rollers. Mr-Glass 8300 horizontal rollers are designed to be serviceable, and replacing the roller assemblies usually costs $85 to $160 per sash. The exception is when the aluminum track itself has pitted to structural thickness or the sash frame has corroded to the point where new rollers won’t seat properly. In those situations, especially along canal-front streets in Fort Lauderdale, we’ll recommend a replacement sash or full window replacement and show you the numbers before you decide.
Service Areas Near Fort Lauderdale
Beyond Fort Lauderdale proper, we serve homeowners across Broward and south Palm Beach. If you’re in our broader Fort Lauderdale service area, Hollywood, Pembroke Pines, Miramar, Coral Springs, or Pompano Beach, our crews are close by. For Mr-Glass owners just south of Fort Lauderdale, see our dedicated Mr-Glass service in Hollywood page. Out west, we cover Mr-Glass service in Pembroke Pines with the same OEM-parts approach and free estimate policy.
Book Your Mr-Glass Service in Fort Lauderdale Today
Mr-Glass windows and doors in Fort Lauderdale need a contractor who understands HVHZ compliance, salt-air corrosion, and the specific failure points of each Mr-Glass series, including our Impact Windows in Fort Lauderdale expertise. That’s us. Call (904) 913-5886 for your free estimate. Ed’s name is on the door, and it’s on every job we do.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fort Lauderdale since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.