Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise almost always means one thing: pulling original 1970s and 1980s aluminum single-pane units and upgrading them to impact-rated assemblies that meet Broward County’s High Velocity Hurricane Zone (HVHZ) code. That’s the job we do most in this city, and we’ve done it across the original master-planned grid from Welleby to Sunrise Lakes. Ed Winslow has been running this company since 2011, and when you call (904) 913-5886, a real person answers – not a call center, not a voicemail loop. We schedule free in-home measures throughout Sunrise, and our crews know exactly what the Broward permit office will flag before we ever pull a unit.
Key Takeaways
- Sunrise falls inside Florida’s HVHZ, so every replacement window and door must carry Florida Product Approval with large-missile impact ratings – a handyman quote that skips this gets flagged at permit review.
- Full-frame impact replacement in Sunrise typically runs $800-$1,500 per opening for standard sizes; whole-home packages start around $8,000.
- Original aluminum sliding glass doors from Sunrise’s 1970s ranch builds are the single most urgent replacement item in the city – insurers are actively flagging them.
- We install PGT, CGI, and CWS impact-rated products with Miami-Dade NOA documentation matched to each opening’s design pressure.
- Free in-home measure, written line-item quote, and a 36500-Day Done Right Promise on every job.
Why Winslow Windows & Doors Is Sunrise’s Preferred Window Replacement Company
We’re not a national chain handing you a ticket number. Winslow Windows & Doors is locally owned and owner-operated, with a published address and license number, and Ed Winslow’s name is on the door – and on every job we do. That means when a Sunrise homeowner off Oakland Park Boulevard or near the Sawgrass Mills corridor calls us about a seized slider or a failed seal, the person who answers the phone is the same person whose reputation rides on how that job turns out.
Our Sunrise customers consistently tell us the same thing: they’d been burned before by vague estimates, no-show crews, or warranties that evaporated after the check cleared. So we do the opposite. Every estimate is a written, line-item quote. Every technician is background-checked and arrives in uniform, so you know exactly who’s at your door before the truck pulls up. And our Window Replacement team has spent years working with Broward County permit reviews, which means we know what gets flagged and we fix it before it does.
We also answer the phone 24 hours a day, seven days a week. A neighbor you can call at 2 a.m. – and someone will actually answer. If a storm just tore through your Sunrise neighborhood and you need a board-up or an emergency assessment, you’re not leaving a message and hoping for a callback.
Dispatch and scheduling run from our Miami office, but our crews serve Sunrise locally and we’re here as often as the work requires. That’s what local accountability looks like when it’s real, not a marketing slogan.
Our Window Replacement Services in Sunrise
Full Frame Replacement
In Sunrise, full-frame replacement is the standard, not the exception. The city’s original CBS ranch houses and low-rise condos were built during the 1970s and 1980s master-planned expansion, and their original aluminum windows don’t just look dated – they’re out of code compliance under the HVHZ. Full-frame replacement means we remove the entire existing assembly down to the concrete block opening, install new jamb flashings per Broward detail, and set a Florida Product Approval impact-rated unit. It’s the only way to guarantee the opening meets current design pressure requirements. For most Sunrise homes, a standard full-frame impact window runs $800-$1,200 per opening installed.

Insert Window Replacement
Insert or “pocket” replacement works only when the existing frame is structurally sound: square, rot-free, and still sealed to the opening. In Sunrise, we see that most often on newer condominium units where the association approved interior retrofit work or on homes where a previous owner already replaced frames once. But here’s the honest caveat: on most original 1970s aluminum frames in Sunrise, the frame itself is corroded from decades of daily afternoon thunderstorm humidity and salt-driven air. Inserts into those frames won’t carry an HVHZ impact approval, and Broward permit reviewers will flag it. When inserts make sense, they typically run $500-$850 per opening in Sunrise – but we’ll tell you honestly if your frame can’t support one.

Vinyl Replacement Windows
Vinyl makes sense in Sunrise for one reason above all: it doesn’t corrode the way the city’s original aluminum frames did. South Florida humidity and salt air eat aluminum tracks, rollers, and corners over 30 to 40 years. A quality vinyl impact window with a laminated glass interlayer – installed as a full-frame replacement – gives you a rot-proof, maintenance-light perimeter that carries the Florida Product Approval number your insurer wants to see. High-performance vinyl impact units in Sunrise typically run $700-$1,300 per window, depending on size and design pressure.

Energy-Efficient Upgrade
Sunrise’s summer sun is relentless, and single-pane aluminum windows do almost nothing to stop solar heat gain. When we replace original single-panes with impact-rated insulated units, homeowners typically see an immediate difference: lower cooling loads, less afternoon heat radiating through west-facing glass along University Drive or Sunset Strip, and fewer rooms that feel like ovens by 4 p.m. Energy-efficient impact windows in Sunrise run $850-$1,500 per opening for standard sizes, and they qualify for the federal 25C energy credit on top of state sales-tax exemption.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We’re authorized installers for PGT, CGI, and CWS, and those three brands cover the overwhelming majority of what Sunrise homeowners need. PGT’s 7700 and WinGuard series dominate the impact slider and single-hung market here, CGI carries a deep lineup of large-missile-rated casement and picture windows, and CWS gives us strong mid-tier options when budget matters but code compliance can’t slip. Because we install these lines constantly across Sunrise, we know which configurations carry which Miami-Dade NOA numbers and which design pressures they meet – so the quote we write matches the opening you actually have, not a generic “impact window” pitch. Local parts access through our South Florida suppliers means turnaround on replacement hardware and glass is measured in days, not months.
Common Window Replacement Problems We See in Sunrise Homes
- Seized and corroded aluminum sliding glass doors. The oversized 8-foot sliders standard in Sunrise’s 1970s ranch homes are a recurring service call across neighborhoods like Sunrise Lakes and the Sawgrass area. Decades of humidity corrode the tracks and rollers until operation fails entirely, and the single-pane glass provides zero impact resistance. Insurers are now explicitly flagging these doors on inspection reports.
- Failed seals on original single-pane windows. Sunrise’s near-daily summer downpours and intense humidity accelerate seal failure on aging aluminum units. You’ll see interior fogging, condensation between panes, and a sharp drop in the window’s ability to block solar heat – which pushes cooling costs up through August and September.
- Non-compliant drop-in replacements flagged at permit review. We’ve seen too many Sunrise homeowners pay for “impact glass” retrofits that skip the HVHZ design pressure and large-missile rating tests. Broward County catches these during permit review and forces a tear-out. If a quote doesn’t list Florida Product Approval numbers and design pressures matched to each opening, it’s not compliant.
- Corner rot and failed flashing on west-facing walls. Sunrise’s afternoon thunderstorms drive rain hard against western exposures. Original 1980s flashing details fail, water gets behind the frame, and by the time you see the interior stain, the rough opening needs remediation before a new unit can be set. Full-frame replacement addresses this properly.
Pricing for Window Replacement in Sunrise, FL
Honest numbers for the Sunrise market: standard impact single-hung windows run $900-$1,800 per opening installed; full-frame impact replacements run $800-$1,500 for typical 36-by-72 openings; and large or custom openings – picture windows, geometric shapes, oversized sliders – run $2,500-$5,000 per unit once you factor in structural headers and custom glass. A whole-home package on a typical Sunrise three-bedroom ranch with 10 to 14 openings lands between $8,000 and $25,000, depending on window count, floor height, and the wind zone requirements for each elevation. Every quote we write is a fixed, line-item price with no change orders. Call (904) 913-5886 to schedule a free in-home measure and get a written quote for your specific house.
What Window Replacement Costs in Sunrise
Here’s what actually moves the number in Sunrise, and it’s rarely the glass. Opening count drives material and labor line items: a three-bedroom CBS ranch built in 1980 typically has 10 to 14 openings including the sliding glass door, and replacements add up faster than homeowners expect. Wind zone matters too: windows on the windward elevation need higher design pressure ratings than the same unit on a sheltered side, and that changes which PGT or CGI configuration applies. Floor height matters on Sunrise’s low-rise condo buildings, where second- and third-floor openings need different anchoring and larger glass. Frame material rounds it out: vinyl keeps material costs down, aluminum thermally broken frames add durability for tall or wide openings, and custom geometries always add fabrication cost. If you’d like an exact number for your house, call (904) 913-5886 for a free in-home measure and a written, fixed quote. There’s no trip charge inside our home county.
Florida Pays You Back
When you replace windows in Sunrise with qualified impact-rated units, you’re eligible for a stack of incentives that most homeowners never learn about until after the job is done. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and window replacement is squarely in scope. Florida’s sales-tax exemption applies to impact-resistant windows and doors, so the product portion of your quote is exempt at purchase. On the federal side, the 25C energy credit returns 30% of product cost up to $600 per year on qualifying energy-efficient units. And after installation, a wind-mitigation inspection – typically $75 to $150 – can qualify you for windstorm-premium credits averaging around 25% on the windstorm portion of your policy. We can’t guarantee your carrier’s final numbers; the programs set those. But we document every installation so you can claim what’s yours.
One more thing worth knowing before you decide: impact windows beat hurricane shutters for most Sunrise homeowners. Shutters only protect you if someone is home to hang them before the storm – and Sunrise sees plenty of afternoon storms with no warning. Impact-rated windows are always on, always protecting the opening, and they don’t need storage space or two people to wrestle into place. They also raise your home’s replacement value instead of just adding another item to the garage.
We Also Serve Cities Near Sunrise
Based right here in South Florida, we serve Window Replacement in Sunrise and the surrounding Broward cities: Fort Lauderdale, Hollywood, Pembroke Pines, and Miramar. If you’re in one of those communities and need the same HVHZ-compliant window replacement work, call (904) 913-5886 and we’ll schedule a free measure.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
Every replacement window and door in Sunrise must carry a Florida Product Approval number meeting High Velocity Hurricane Zone performance standards, which means large-missile impact testing and a design pressure rating matched to the specific opening’s wind zone and floor height. A handyman quote often skips the product approval documentation, the permit filing, and the required inspection. A compliant quote lists the Florida Product Approval and Miami-Dade NOA numbers for every unit, the design pressure rating per opening, and the Broward County permit steps included in the price. Call (904) 913-5886 and we’ll walk you through what a compliant quote looks like line by line.
Almost never in Sunrise, and here’s why honestly: the original 1970s and 1980s aluminum frames on the city’s CBS ranch homes and condos are corroded, out of square, and were never rated for impact glazing. A glass-only swap doesn’t meet HVHZ requirements because the frame itself fails under large-missile impact testing. Full-frame replacement is the only code-compliant path for the overwhelming majority of Sunrise homes. We’ll verify your specific openings at the free measure and tell you plainly what’s possible. Call (904) 913-5886 to schedule it.
Insurers treat sliding glass doors as the single largest unprotected opening on a Sunrise home, and many carriers now specifically flag original aluminum sliders from the 1970s era on their inspection reports. A single 8-foot single-pane slider can be enough to trigger a nonrenewal notice on an otherwise fine policy. Replacing that slider with a PGT or CGI impact-rated unit with a Miami-Dade NOA and laminated glass turns the hardest-to-insure opening into one your carrier credits on the policy. After we install, we walk you through the wind-mitigation inspection paperwork so the credit actually gets applied.
A compliant Sunrise window replacement starts with a Broward County permit application listing every opening, its Florida Product Approval number, and the design pressure rating for each. Once the permit is issued, we set the units with the required flashing details, then a county inspector verifies the installation against the approved plans. A final wind-mitigation inspection – usually a separate step – documents the installation for your insurer. We pull the permits, schedule the inspections, and stand behind the work until the county signs off. Call (904) 913-5886 and we’ll explain the exact steps for your project.
You prove it with documentation: the Florida Product Approval numbers for each installed unit, the permit and inspection records from Broward County, and a wind-mitigation inspection report prepared by a qualified inspector showing the opening protection credits. We provide all of that to you in a single packet after installation – no chasing us down for paperwork. The wind-mitigation inspection itself typically runs $75 to $150 and is separate from the county inspection. Most Sunrise homeowners recover that cost within the first year of premium credit applied.
Call Winslow Windows & Doors for Your Sunrise Window Replacement
If you live in Sunrise – whether it’s a 1970s ranch off NW 44th Street, a condo in Sunrise Lakes, or a newer home near the Sawgrass Mills corridor – and you’re ready to replace original windows or a failing slider, we’re the one down the road. Call (904) 913-5886 to schedule a free in-home measure. You’ll get a written line-item quote, a clear explanation of what the Broward HVHZ code requires for your specific openings, and a fixed price that won’t change once work begins. Upfront pricing. No surprises on the invoice. Impact-rated, energy-certified, and done right the first time – or we come back. Ed’s name is on the door, and on every job we do in Sunrise.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Sunrise since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After