Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across Lauderhill
Energy-efficient window replacement in Lauderhill typically runs $800-$1,500 per window installed, with whole-home packages ranging from $8,000 to $25,000 depending on opening count, floor height, and whether the units need large-missile impact glazing. Lauderhill sits inside Broward County’s High Velocity Hurricane Zone, so almost every replacement here must meet HVHZ standards, not just ENERGY STAR guidelines. If you live off West Commercial Boulevard or near Plantation Park and your home still has jalousie windows from the 1970s, you’re probably looking at a full fenestration replacement, not a glass swap. Call Ed Winslow and our energy-efficiency team at (904) 913-5886 and we’ll walk the property, map every opening, and give you a written line-item quote for free.
Why Winslow Windows & Doors Is Lauderhill’s Preferred Energy-Efficient Windows Company
We learned Lauderhill’s housing stock the hard way: by working on it. Concrete block ranches built between 1960 and 1980, low-rise apartment buildings along the University Drive and State Road 7 corridors, and a surprising number of original jalousie panels that insurance carriers now refuse to bind. Ed Winslow founded this company in 2011, and since then our crews have replaced hundreds of single-pane aluminum frames across ZIP codes 33319, 33320, and 33324. We know which Lauderhill homes need full tear-outs versus which can accept a cleaner retrofit, and we know the building department’s documentation sequence cold.
Customers in Lauderhill don’t get a ticket number. They get our phone number, answered by a live person 24/7, and a background-checked tech in uniform at the door. Every quote we write includes the exact Miami-Dade NOA or Florida Product Approval number for each window configuration, the design pressure rating matched to the opening, and the wind mitigation paperwork your insurer will request. That’s the difference between a window job that closes cleanly and one that stalls at final inspection.
Our Energy-Efficient Windows Services in Lauderhill
Low-E & Argon Gas Glass
Low-E coatings block infrared heat while argon gas between the panes slows thermal transfer. In Lauderhill’s climate, where the sun pounds east-facing windows along East Sunrise Boulevard from late morning on, Low-E with argon can cut solar heat gain enough to drop cooling loads noticeably during the summer months. We size the coating type to the orientation of each opening, not a one-size-fits-all spec.

ENERGY STAR Replacement Windows
ENERGY STAR certification for the South Florida zone means the unit’s SHGC and U-factor are tuned for cooling-dominated climates, not northern heating. We pull the actual label ratings per configuration and show you the number on the quote. You’ll know your SHGC and U-factor before you sign, not after the boxes arrive.

Insulated Laminated Glass
This is where energy performance and storm protection meet. Insulated laminated glass pairs a low-E insulated unit with an impact-resistant interlayer, so the same window that lowers your AC load also satisfies HVHZ large-missile requirements. For Lauderhill homeowners replacing jalousie panels, this is the standard upgrade path: one window doing both jobs.

UV-Blocking & Fade Protection
Tile floors, furniture, and artwork in Lauderhill homes take a beating from UV exposure, especially in south-facing rooms. UV-blocking coatings built into the low-E stack filter most ultraviolet radiation before it enters the glass. You’ll see a difference on fabric and wood within a year. We’ll flag which openings in your house are the worst offenders during the estimate walk.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lauderhill
We’re an authorized installer for eight premium window and door lines, and in Lauderhill we lean heavily on CGI, PGT, and ES Windows for energy-efficient impact units. These are manufacturers whose Florida Product Approval documentation holds up at inspection and after a storm claim. We maintain local parts access for common latch, balance, and seal replacements, which means faster turnaround when a Lauderhill customer needs a service call rather than a full replacement. We don’t sell generic off-brand units and we won’t quote a window we wouldn’t put in our own block home.
Common Energy-Efficient Windows Problems We See in Lauderhill Homes
- Jalousie glass still in place. Louvered windows leak air, can’t carry a meaningful energy rating, and are the number one reason Lauderhill insurers send non-renewal letters. Replacement is mandatory, not optional.
- Failed seals from humidity cycling. Broward County’s wet season pushes moisture into old aluminum frames. Fogged glass means the argon has escaped and the SHGC printed on the label no longer matches real performance.
- Incomplete impact coverage. Some homes got street-facing impact windows years ago but left rear jalousie panels untouched. Under Florida Statute 627.0629, the wind mitigation credit requires impact glazing on every opening, not just the front elevation.
- Vinyl frames warped by heat and humidity. Cheap extruded vinyl can bind and rack in Lauderhill’s climate, causing sashes to stick and jamb seals to fail. The unit’s energy label becomes fiction if the sash doesn’t seat.
Pricing for Energy-Efficient Windows in Lauderhill, FL
You’ll see a lot of national ads quoting $300-$500 per window. That’s not a Lauderhill number. A compliant replacement here means impact-rated, HVHZ-approved units with Miami-Dade NOA or Florida Product Approval documentation, and that changes the math. A standard single-hung impact window in a Lauderhill single-family home runs $900-$1,800 installed. Larger openings, second-story work, or custom geometric windows can push $2,500-$5,000 each. A whole-house replacement for a typical three-bedroom block home off Southwest 15th Street usually lands between $12,000 and $22,000. The free estimate we give you in writing breaks out every line, so you can see what’s product, what’s labor, and what’s permit work.
What Energy-Efficient Windows Costs in Lauderhill
Impact windows in Lauderhill generally cost $800-$1,500 per window installed. A single-hung impact unit runs $900-$1,800. Large or custom openings, like picture windows or geometric shapes, land between $2,500 and $5,000. Whole-home packages range from $8,000 on the low end for a smaller concrete block house to $25,000+ for larger two-story properties. What moves the price in Lauderhill specifically? Opening count, whether the home is one or two stories, frame material, whether the structural buck or jamb needs rebuilding, and the design pressure rating required for the opening’s location on the wall. Call (904) 913-5886 and we’ll measure every opening and hand you a written quote you can compare line by line.
Trusted Brands We Service in Lauderhill
We’re an authorized installer for PGT, CGI, CWS, ES Windows, and Therma-Tru, among others. In Lauderhill we stock common replacement glass, balance systems, and hardware for these lines so our Roof Repair in Lauderhill turnaround is measured in days, not weeks. Our technicians service what we sell, and we don’t push a brand we wouldn’t stand behind for 36500 days. Mention the brand you have and we’ll tell you honestly whether it’s worth repairing or replacing.
Common Energy-Efficient Windows Problems We See in Lauderhill Homes
- Failed argon gas seals causing fogging – when the seal between panes breaks, the R-value drops and the glass fogs permanently. We see it most often in homes near the water or on older aluminum frames from the 1960s.
- Non-impact windows that don’t meet HVHZ code – some homeowners bought “energy-efficient” windows from a big-box store and later learned they didn’t satisfy Broward County’s High Velocity Hurricane Zone requirements. That’s a costly discovery at resale or insurance renewal.
- Faded flooring and window treatments on south-facing rooms – UV damage shows up as uneven bleaching on tile, hardwood, and fabrics. A proper low-E coating solves it without darkening the room.
- Warped vinyl frames from years of high heat – Lauderhill’s summer sun breaks down cheap vinyl, causing sashes to stick and seals to fail. We replace with aluminum or reinforced frames built for Florida’s climate.
Pricing for Energy-Efficient Windows in Lauderhill, FL
The question every Lauderhill homeowner asks is: what does it actually cost to upgrade to energy-efficient impact windows? The honest answer for this market is $800 to $1,500 per window installed, depending on opening size, frame material, and product line. A whole-home replacement on a typical 1960s concrete block house in the 33319 ZIP code usually runs $8,000 to $25,000. Individual windows are on the lower end; large or custom openings like picture windows or geometric shapes can hit $2,500 to $5,000 each. Every quote from us is a fixed, written price, not a range and not a starting point. We don’t change the number once work starts unless the opening reveals structural damage we couldn’t see during the measure, and we’ll show you the rot before we touch it. Call (904) 913-5886 for a free estimate from Ed’s team.
Florida Pays You Back
Lauderhill homeowners have access to incentive programs that offset part of the window investment. The My Safe Florida Home program has historically matched up to $10,000 toward wind-mitigation upgrades for qualifying homes, though funding cycles open and close on the state’s schedule. Florida also exempts impact-resistant windows and doors from sales tax, which shaves roughly six percent off the invoice. On the federal side, the 25C energy credit allows up to $600 per year (30% of product cost on qualifying units with a U-factor at or below 0.30). And many Lauderhill carriers apply a windstorm-premium credit averaging around 25% on the windstorm portion after you complete a wind-mitigation inspection, which typically costs $75 to $150. We can’t guarantee the numbers your insurer or the state will apply, but we’ll hand you the documentation that makes the application straightforward.
We Also Serve Cities Near Lauderhill
If you’re just outside Lauderhill, we cover the surrounding South Florida communities too. Our Energy-Efficient Windows crews work regularly in Lauderhill as well as Fort Lauderdale, Hollywood, Pembroke Pines, and Miramar, so the same local expertise and HVHZ knowledge travels to your door.
Serving Lauderhill, FL - Our Local Coverage Area
We’re based in the Lauderhill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Lauderhill
Because Lauderhill sits inside Broward County’s High Velocity Hurricane Zone, every replacement window must carry a Miami-Dade NOA or Florida Product Approval for large-missile impact, regardless of the glass package. You can absolutely get Low-E, argon gas, and UV-blocking coatings, but those features must ride inside an impact-rated frame. A non-impact Low-E window will fail inspection, so the answer is: your energy-efficient window in Lauderhill must be both impact-rated and energy-certified. Call (904) 913-5886 and we’ll spec the exact unit for each opening.
Most likely yes, but the trigger is impact compliance, not the energy rating. Under Florida Statute 627.0629, carriers must offer wind-mitigation premium credits when every opening on the home meets impact-glazing requirements, and after a wind-mitigation inspection the windstorm portion of your premium commonly drops around 25%. The energy performance is a bonus; the documented large-missile rating is what moves the premium number. We photograph and log every Florida Product Approval number per opening during install so your inspection has what it needs.
The City of Lauderhill building department requires a permit application with the product approval documents for each window configuration, including the Miami-Dade NOA or Florida Product Approval number and the design pressure rating for the specific opening. Inspections follow the install, and a final needs the approved permit card, the installed-product stickers, and a completed wind-mitigation inspection where applicable. We handle the permit pull, schedule the inspection, and stand on-site for it. Our 36500-Day Done Right Promise means if the inspection flags something, we come back and fix it without a change order.
In most Lauderhill homes, no. The original aluminum frames on 1960s and 1970s block houses were never tested or approved for large-missile impact, so the frame itself doesn’t meet HVHZ requirements regardless of what glass you drop into it. Insurance carriers reject this approach because the opening as a whole isn’t compliant. Retrofitting glass-only also leaves the jamb and buck condition untouched, and most of those older frames have at least some corrosion. Where the frame is a modern, approved impact frame and only the glass package failed, we can sometimes replace the sash or insulated unit, and we’ll tell you honestly which path applies to your home.
SHGC matters more in Lauderhill. U-factor measures how well the window resists conductive heat flow, which is a bigger deal in cold climates. SHGC measures how much solar heat the glass lets through, and in a cooling-dominated climate like Broward County’s, a lower SHGC means less heat entering the home and lower AC demand. We spec the coating and tint levels to the SHGC that fits each elevation, orienting the glass package to the sun exposure off West Commercial Boulevard or wherever your home sits.
Why the Local Angle Matters: HVHZ Replacement Is Different in Lauderhill
Lauderhill’s replacement window market isn’t optional for most homeowners. The city’s housing stock was built for a different era: poured concrete block homes from the 1960s and 1970s with jalousie louvered windows and single-pane aluminum frames, all of which fail current Broward County HVHZ requirements. Insurance carriers writing policies in 33319 and 33324 now routinely require proof that jalousie windows have been replaced with large-missile-approved impact units before they’ll bind coverage. That means the trigger for a Lauderhill window job is often a closing, a refinance, or a renewal letter, not just a desire for lower electric bills. The energy efficiency upgrade happens alongside the code compliance because Lauderhill Roof Replacement & Installation has to happen regardless.
The Documentation Is the Product in Lauderhill
Here’s what a compliant quote from Winslow Windows & Doors includes that a cheap one leaves out. Every window in your quote is listed with its Miami-Dade NOA or Florida Product Approval number, the design pressure rating (a PSF number specific to that opening’s size and location on the wall, never above +/-100), and the energy labels for SHGC and U-factor. We pull the permit, submit the product approvals to the City of Lauderhill building department, and provide the documentation package your wind-mitigation inspector and insurer will ask for. If a contractor can’t tell you the NOA number before the install, walk away. We say that because we’ve been called out to fix jobs where the final failed and the refinance stalled. It’s not fun to hear.
Field Notes from Plantation Park
On a concrete block ranch near Plantation Park, our crew replaced original jalousie windows with PGT double-hung impact units featuring a laminated glass interlayer and low-E insulated glass. The homeowner’s insurer had sent a non-renewal notice unless all openings met HVHZ large-missile ratings, so we documented each unit’s design pressure and Florida Product Approval number for the wind mitigation inspection. Coverage was bound within a week of the final sign-off. That’s the standard sequence we run in Lauderhill, and it’s why we don’t cut corners on paperwork: your insurer is a stakeholder in this job whether you invited them or not.
Impact Windows vs Hurricane Shutters: The Lauderhill Math
You could install hurricane shutters and leave your existing glass in place, but then you’re still living behind single-pane aluminum and running the AC hard all summer. Impact windows are permanent protection: no panels to drag out before a storm, no storage, no last-minute scramble. They do the energy job and the wind job simultaneously, and they qualify for the insurance credits and the Florida sales-tax exemption. Shutters don’t touch your energy bill or your SHGC. For Lauderhill homes that need to upgrade glass anyway, impact windows are the route that solves every problem at once.
Call Ed’s Team for Your Lauderhill Window Estimate
We’re the Energy-Efficient Windows team that lives down the road and answers the phone around the clock. A live person picks up at (904) 913-5886, 24 hours a day, seven days a week. No call centers, no voicemail loops. We’ll set a time to measure every opening in your Lauderhill home, walk you through the documentation you need, and hand you a written quote with fixed pricing and line items you can actually read. Ed’s name is on the door, and on every job we do. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Lauderhill and South Florida since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After